310 Powder

310 Description:

310 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing

310 Powder Related Information :

Storage Conditions:

Airtight sealed, avoid light and keep dry at room temperature.

Please contact us for customization and price inquiry

Email: contact@nanochemazone.com

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

310 Powder

310 powder is an austenitic stainless steel powder containing high levels of chromium, nickel and nitrogen for enhanced mechanical properties and corrosion resistance. It offers an excellent combination of strength, hardness, toughness and wear resistance.

Overview of 310 Powder

310 powder is an austenitic stainless steel powder containing high levels of chromium, nickel and nitrogen for enhanced mechanical properties and corrosion resistance. It offers an excellent combination of strength, hardness, toughness and wear resistance.

310 Powder Properties and Characteristics

310 powder is widely used in applications requiring hardness, wear resistance, and corrosion resistance like valve parts, shafts, bearing cages, fasteners, surgical instruments etc.

310 Powder Composition

Iron provides the ferritic matrix and ductility

Chromium and nickel enhance corrosion resistance

Nitrogen provides solid solution strengthening

Carbon, silicon, manganese controlled as tramp elements

The optimized composition provides an excellent combination of strength, hardness, corrosion resistance, and cost.

310 Powder Physical Properties

High density compared to ferritic stainless steels

Maintains excellent strength at elevated temperatures

Resistivity higher than pure iron or carbon steels

Lower thermal conductivity than carbon steel

Can withstand continuous service up to 1150°C

The physical properties make 310 suitable for high temperature applications requiring hardness, strength and corrosion resistance.

310 Powder Mechanical Properties

Very high strength for 300 series stainless steel

Excellent hardness and wear resistance

High toughness and impact strength

Strength can be further increased through cold working

Cold working also significantly enhances hardness

The properties provide an excellent combination of strength, hardness and toughness required in many wear resistant applications.

310 Powder Applications

Some specific product uses:

High strength fasteners, bolts, nuts

Pump and valve components like seals, shafts

Food processing extruder screws and blades

High hardness press tooling and molds

Mixing equipment, impellers requiring wear resistance

Its excellent combination of properties make 310 widely used for specialized applications across industries.

310 Powder Standards

These standards define:

Chemical composition limits of 310 alloy

Permissible impurity levels like S, P

Required mechanical properties

Approved production methods

Compliance testing protocols

Proper packaging, labeling and documentation

Meeting certification requirements ensures suitability of the powder.

310 Powder Particle Size Distribution

Finer particles allow greater densification during sintering

Coarser powder flows better and fills die cavities uniformly

Size range is tailored based on final part properties needed

Both gas and water atomized powders are available

Controlling particle size distribution allows optimizing processing behavior and final part performance.

310 Powder Apparent Density

Higher apparent density improves powder flow and compressibility

Irregular morphology limits maximum packing density

Values up to 60% are possible with spherical powders

High apparent density improves press filling efficiency

Higher apparent density leads to better manufacturing productivity and part quality.

310 Powder Production

Gas atomization provides clean, spherical powder morphology

Water atomization is a lower cost process with irregular particles

Vacuum melting and remelting minimizes gaseous impurities

Post-processing allows customization of particle sizes

Automated production and stringent quality control result in consistent powder suitable for critical applications.

310 Powder Handling and Storage

310 Powder Pros and Cons

Advantages of 310 Powder

Excellent strength and hardness for stainless steel powder

High temperature strength and corrosion resistance

Good ductility, toughness and weldability

Excellent wear and abrasion resistance

Readily work hardens significantly

More cost-effective than high nickel or exotic alloys

Disadvantages of 310 Powder

Lower ductility than austenitic grades in annealed state

Lower pitting corrosion resistance than 316 grade

Requires care during welding to avoid sensitization

Limited cold heading and forming capability

Susceptible to sigma phase embrittlement at high temperatures

Surface discoloration over time in some environments

Comparison With 316L Powder

310 has far higher strength and hardness

316L provides better overall corrosion resistance

310 is more cost-effective than 316L

310 suited for applications needing hardness and wear resistance

316L preferred where corrosion is the primary concern

310 Powder FAQs

Q: What are the main applications of 310 stainless steel powder?

A: Main applications include high-strength fasteners, pump and valve components, extruder screws, press tooling, bearing cages, shafts, and surgical instruments requiring hardness, strength and wear resistance.

Q: What is nitrogen’s role in 310 stainless steel?

A: Nitrogen provides substantial solid solution strengthening which significantly increases the strength and hardness of 310 stainless steel.

Q: What precautions are needed when working with 310 powder?

A: Recommended precautions include ventilation, inert atmosphere, grounding, avoiding ignition sources, protective gear, using non-sparking tools, and safe storage in stable containers.

Q: How does 310 stainless steel differ from 304 and 316 grades?

A: 310 has much higher strength and hardness than 304 or 316 due to its high nitrogen content. It offers better wear resistance but lower corrosion resistance than 316.

Al 6061 Powder

Al 6061 Description:

Al 6061 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing

Al 6061 Powder Related Information :

Storage Conditions:

Airtight sealed, avoid light and keep dry at room temperature.

Please contact us for customization and price inquiry

Email: contact@nanochemazone.com

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

Al 6061 powder

Al 6061 powder is a versatile aluminum material composed of various elements to enhance its properties, such as strength, corrosion resistance, and machinability. It is widely used in different industries for its excellent characteristics.

Overview of Al 6061 Powder

Al 6061 is one of the most versatile heat treatable aluminum alloys. Magnesium and silicon additions allow it to be strengthened through precipitation hardening. The alloy has become immensely popular due to its excellent corrosion resistance, machinability, weldability and medium to high strength.

Key characteristics of Al 6061 powder include:

Medium to high strength with excellent ductility and toughness

Excellent corrosion resistance and finishability

Very good weldability and machinability

High thermal and electrical conductivity

Low density

Available in a wide range of powder sizes and shapes

Al 6061 powder is used widely for aerospace, marine, automotive, construction and general engineering applications needing lightweight and good mechanical properties.

Chemical Composition of Al 6061 Powder

Production Method for Al 6061 Powder

Commercial production methods for Al 6061 powder include:

Gas Atomization – High pressure inert gas disintegrates molten alloy stream into fine spherical powder with controlled size distribution.

Water Atomization – High velocity water jet impacts and disintegrates molten metal to produce fine irregular powder particles.

Mechanical Alloying – Ball milling a blend of aluminum and alloying element powders followed by compaction and sintering.

Gas atomization provides superior control over the powder characteristics.

Applications of Al 6061 Powder

Additive Manufacturing – Used in selective laser melting, electron beam melting and binder jetting to produce complex components.

Metal Injection Molding – To manufacture small intricate parts with tight tolerances and excellent properties.

Powder Metallurgy – Press and sinter process to create high performance automotive and mechanical parts.

Thermal Spraying – Wire arc spraying to deposit protective Al 6061 coatings offering wear and corrosion resistance.

Welding Filler – Used as filler wire to provide weld strength similar to base metal.

Pigments – Added to paints and polymers to provide luster and corrosion protection.

Specifications of Al 6061 Powder

Al 6061 powder is available under different size ranges, shapes, grades and purity levels:

Particle Size: From 10-150 microns for AM methods, up to 300 microns for thermal spray processes.

Morphology: Spherical, granular, dendritic and irregular shaped particles. Smooth powder flows better.

Purity: From commercial to high purity (99.9%) tailored to meet requirements.

Grades: Conforming to ASTM B221, EN 573, and ISO 209 specifications. Custom grades offered.

Flowability: Powder can be customized for specific flow rates based on application.

Storage and Handling of Al 6061 Powder

Al 6061 powder should be properly handled and stored to prevent:

Oxidation and reaction with moisture

Dust explosion hazards from fine powder

Inhalation related health problems

Safety practices from supplier SDS should be followed

Inert gas storage, adequate ventilation, grounding, and PPE is recommended when handling the powder.

Testing and Characterization Methods

Key test methods used for Al 6061 powder include:

Chemical analysis using OES or XRF for composition

Particle size distribution as per ASTM B822 standard

Morphology analysis through SEM

Powder flow rate measured by Hall flow funnel

Density determination by helium pycnometry

Impurity testing by ICP-MS

Microstructure examination by X-ray diffraction

These tests ensure batch consistency and compliance with application requirements.

Comparison Between Al 6061 and Al 7075 Powders

Al 6061 and Al 7075 are two aluminum alloy powders compared:

Al 6061 offers better corrosion resistance and machinability while Al 7075 provides much greater strength after heat treatment.

Al 6061 Powder FAQs

Q: How is Al 6061 powder produced?

A: Al 6061 powder is commercially produced using gas atomization, water atomization, mechanical alloying, and electrolysis techniques. Gas atomization offers optimal control of powder characteristics.

Q: What are the main applications of Al 6061 powder?

A: Key applications for Al 6061 powder include additive manufacturing, thermal spray coatings, powder metallurgy parts, metal injection molding, pigments, and welding filler wire requiring medium strength and excellent corrosion resistance.

Q: What is the recommended Al 6061 powder size for binder jetting?

A: For binder jetting process, the typical Al 6061 powder size range is 20-45 microns with spherical morphology to enable good powder bed density and binder infiltration.

Q: Does Al 6061 powder require any special handling precautions?

A: Yes, it is recommended to handle aluminum alloy powders carefully under inert atmosphere with proper grounding, ventilation and PPE to prevent fire or explosion hazards.

Q: Where can I buy Al 6061 powder suitable for aerospace applications?

A: High purity gas atomized Al 6061 powder meeting aerospace standards can be purchased from leading manufacturer.

AlSi50 Powder

AlSi50 Description:

AlSi50 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing

AlSi50 Powder Related Information :

Storage Conditions:

Airtight sealed, avoid light and keep dry at room temperature.

Please contact us for customization and price inquiry

Email: contact@nanochemazone.com

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

AlSi50 Powder

AlSi50 is an aluminum-silicon alloy powder containing 50% silicon and remainder aluminum. It offers an exceptional combination of properties like low density, high fluidity, low thermal expansion, high specific strength, and corrosion resistance.

AlSi50 is an aluminum-silicon alloy powder containing 50% silicon and remainder aluminum. It offers an exceptional combination of properties like low density, high fluidity, low thermal expansion, high specific strength, and corrosion resistance.

AlSi50 Powder Composition

The typical composition of AlSi50 alloy powder is:

Aluminum forms the matrix providing ductility, toughness and corrosion resistance.

Silicon increases hardness, fluidity and reduces the coefficient of thermal expansion.

The high 50% silicon content results in a eutectic composition with the lowest possible melting point and excellent castability. Strict control of the Al to Si ratio is critical.

Properties of AlSi50 Powder

AlSi50 powder possesses a unique mix of properties making it suitable for high performance applications:

Low density – Up to 40% lower than titanium alloys and steels.

High fluidity when molten – Enables excellent castability and mold filling.

High strength-to-weight ratio – Specific strength comparable to titanium alloys.

Low coefficient of thermal expansion – Dimensions remain stable over a wide temperature range.

Excellent corrosion resistance – Protective oxide layer prevents corrosion in most environments.

Good thermal conductivity – Twice that of titanium alloys allowing efficient heat dissipation.

This unique property profile makes AlSi50 suitable for applications where low mass, precision, stability, and strength are critical.

Applications of AlSi50 Powder

The key properties of AlSi50 powder make it ideal for:

Automotive – Used in pistons, engine blocks, drivetrain parts to reduce weight and improve fuel efficiency.

Aerospace – Ideal for precision aerospace components like actuators and turbocharger wheels requiring highest strength-to-weight.

Electronics – Substrates for PCBs, IC packages to manage thermal loads while matching expansion behavior of ceramics.

Optics – Mirror blanks, telescopes benefit from high dimensional stability and machinability.

Medical – Excellent biocompatibility and corrosion resistance for implants like orthopedic devices.

AlSi50 Powder Specifications

AlSi50 powder is available in various size fractions, shapes, and purity levels:

Smaller particles promote higher sintered density while large particles improve flowability.

Spherical morphology enhances powder flow compared to irregular particles.

Higher apparent density increases effective loading in composites manufacturing.

Faster flow rates improve ease of powder handling and processing.

High purity grades minimize contamination issues.

Aluminum-silicon alloys with 30-40% silicon also available.

Powder attributes can be customized based on specific application requirements and processing methods.

Consolidation Methods for AlSi50 Powder

AlSi50 powder can be transformed into full density components using techniques like:

Powder bed fusion AM techniques like selective laser melting are ideal for low volume complex parts.

Metal injection molding offers closest tolerances and surface finish.

Pressing followed by liquid phase sintering is commonly used but secondary processing needed.

Investment casting provides higher productivity for simpler geometries.

Extrusion is suitable for continuous production of bars, rods and tubes.

The consolidation method strongly influences final properties, microstructure and cost economics.

Heat Treatment of AlSi50 Parts

The following heat treatments can be used to modify AlSi50 properties:

Solution treatment dissolves silicon particles in the aluminum matrix followed by rapid cooling.

Subsequent aging causes silicon to re-precipitate as fine dispersoids imparting strengthening.

Low temperature stress relieving helps reduce residual stresses from prior shaping steps.

Proper heat treatment allows customizing the strength, hardness and ductility as per application requirements.

Comparison of AlSi50 Powder with Alternatives

Here is how AlSi50 compares to other eutectic aluminum-silicon alloys:

AlSi40 offers the best all-round combination of fluidity, strength and thermal conductivity.

AlSi30 provides highest thermal conductivity but lowest strength and fluidity.

AlSi50 has the highest fluidity, hardness and strength but lower thermal conductivity.

AlSi50 is preferred where maximum castability, dimensional stability, and high specific strength are critical.

Health and Safety Considerations for AlSi50 Powder

Like any metal powder, AlSi50 powder requires safe handling:

Wear gloves, goggles, mask when handling powder.

Avoid skin contact. Wash after exposure.

Store in cool, dry place away from sparks, flames.

Ensure proper ventilation and dust collection.

Refer SDS and local regulations for complete guidelines.

With proper precautions and PPE, AlSi50 powder can be safely handled.

Inspection and Testing of AlSi50 Powder

To ensure quality specifications are met, AlSi50 powder should undergo:

Testing should be done periodically as per ASTM standards to ensure consistency in production quality and performance in end-use applications.

FAQs

1. What is AlSi50 used for?
2. AlSi50 is ideal for applications like automotive components, aerospace parts, and electronic substrates where low mass, dimensional stability, and high fluidity are critical.
3. Does AlSi50 require heat treatment?
4. Optional heat treatment including solutionizing and aging can be done to enhance strength by precipitating silicon particles in the microstructure.
5. What methods can consolidate AlSi50 powder?
6. AlSi50 powder can be consolidated to full density using metal injection molding, casting, additive manufacturing via SLM/EBM, extrusion, and sintering.
7. Is AlSi50 readily weldable?
8. AlSi50 has relatively poor weldability owing to high silicon content. Special filler material and techniques are required for welding this alloy.
9. Is AlSi50 powder safe to handle?
10. Like any fine metal powder, standard safety precautions must be taken when handling AlSi50 powder to minimize health and safety risks.

Aluminum Alloy Powder

Aluminum Alloy Description:

Aluminum Alloy Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing

Aluminum Alloy Powder Related Information :

Storage Conditions:

Airtight sealed, avoid light and keep dry at room temperature.

Please contact us for customization and price inquiry

Email: contact@nanochemazone.com

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

Aluminum alloy series

The aluminum alloy family is a family of materials with a variety of unique properties and areas of application. Their characteristics mainly depend on the alloying elements contained in them and their proportions. These ranges offer a wide range of opportunities to meet the needs of different industries. Let’s explore the features and typical applications of each series to better understand how to choose the best aluminum alloy material for your project.

Process: Vacuum air atomization method

Advantages: low satellite powder/hollow powder ratio, good fluidity, high sphericity, and high bulk density. Printed finished parts have high corrosion resistance, low density and mechanical strength
High degree of heat treatment, requiring less heat treatment than castings

Application: 3D printing lightweight, brackets and other structural parts, heat dissipation components, etc. in aerospace, automobile manufacturing and other industries

Packaging: aluminum foil bags/plastic bottles/iron drums and other ordinary packaging or vacuum packaging, etc.