Product Name: Ferro Titanium Carbide Powder

Ferro Titanium Carbide Powder Applications Fields:

Ferro Titanium Carbide Powder is a ferroalloy, an alloy of iron and titanium with between 10–20% iron and 45–75% titanium and sometimes a small amount of carbon. Ferrotitanium can be manufactured by mixing titanium sponge and scrap with iron and melting them together in an induction furnace.

During steelmaking, titanium is usually introduced as ferrotitanium because of its relatively low melting temperature and high density.

Ferrotitanium is usually produced by induction melting of titanium scrap with iron or steel; however, it also is produced directly from titanium mineral concentrates.

Application of Ferro Titanium carbide powder:

In the present study, Fe-based hardfacing coating reinforced by TiC particles was obtained by manual shielded metal arc welding (SMAW) in which H08A bare electrode was coated with fluxes, to which different measures of ferrotitanium, rutile, graphite, calcium carbonate, and calcium fluoride had been added.

The microstructure and wear properties of the hardfacing coating were studied through scanning electron microscopy (SEM), transmission electron microscopy (TEM), an X-ray diffractometer (XRD), and a wear test.

The results indicate that TiC particles are produced by a direct metallurgical reaction between ferrotitanium and graphite during welding.

TiC particles are uniformly dispersed in the matrix of lath martensite and retained austenite with particle sizes in the range of 3–5 μm. Fe-based hardfacing coating reinforced by TiC particles is found to possess better wear resistance and a lower coefficient of friction than that of the AISI 1045 steel substrate.

Please email us for the customization.

Email: contact@nanochemazone.com

Please contact us for customization and price inquiry

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

Product Name: Ferrovanadium Nitride Powder

Ferrovanadium Nitride Powder Description: 

Ferrovanadium Nitride (Vanadium-Nitrogen alloy) is a composition ferrovanadium nitride.

Ferrovanadium nitride is proposed for joint nitrogen and vanadium steel doping.

Ferrovanadium Nitride (Vanadium-Nitrogen Alloy) is a new type of alloy additive,

It can substitute Ferro Vanadium used in the production of Micro alloying-steel.

Ferrovanadium Nitride Powder Application:

1. FeVN alloy powder can be used for structural steel, tool steel, pipeline steel, steel, and cast iron.
2. It is used for nitrogen-containing steel melting: high- strength low-alloy steel (HSLA), rail steel, quick cutting steel, etc.

4. Ferrovanadium Nitride adding to the steel can increase the strength, tough, tactility, anti-thermal fatigue, etc.
5. It also can make the steel be able to fulfill solderability to attain the same strength, adding Ferrovanadium Nitride could save 30-40% of Vanadium, thereby saving the cost.

Ferrovanadium Nitride Powder Advantages:

1. Low melting point, high-density products, under the condition of the same production, vanadium and nitrogen yield is higher than similar products.
2. Low nitrogen vanadium than more reasonable, high strengthening ability.
3. Stable high product purity, ingredients, production has smaller fluctuation, the mechanical performance of steel performance has higher reliability.

Please email us for the customization.

Email: contact@nanochemazone.com

Please contact us for customization and price inquiry

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

Product Name: Silicon Carbide Powder

Silicon Carbide Powder Description:

Silicon carbide is produced in the same way as Black silicon Carbide except for some differences in the raw material. Its crystallization has higher purity and hardness. Green silicon carbide is suitable for processing hard alloy, metallic and non-metallic materials with hard and brittle features such as copper, brass, Aluminum, magnesium, jewel, optical glass, ceramics, etc.

Silicon Carbide Applications: 

• One of the best properties of silicon carbide is that it is resistant to alkali and acids.
• It retains strength when applied at high temperatures.
• It shows good electrical conductivity and shock resistance capacity and for this reason, it is preferred for applying in an electric furnace to heat elements.
• It is compatible to apply under extreme conditions of applications.
• Apart from that, this chemical component also shows considerable thermal expansion and conductivity.
• It is an ideal component for applications requiring good flexural strength.
• We provide this product after evaluating the properties, ingredients, and applicability to cover a wide range of industrial usages.

Advantages:

1. Large melting furnace, longer melting time, lead to more crystallization, bigger crystals, higher purity, and fewer impurities.
2. Beckman coulter particle size distribution instrument.
3. The laboratory is registered at the government Import and Export Inspection Bureau.

Silicon Carbide Powder Related Information

Please email us for the customization.

Email: contact@nanochemazone.com

Please contact us for customization and price inquiry

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

Zirconium Carbide Powder

Product Name: Zirconium Carbide Powder

Zirconium Carbide Powder Description:

Like most carbides of refractory metals, zirconium carbide is sub-stoichiometric, i.e., it contains carbon vacancies.

At carbon contents higher than approximately ZrC0.98 the material contains free carbon.

ZrC reacts with water and acids and is pyrophoric.

It becomes readily oxidized in the air when exposed to elevated temperatures.

It shows a high amount of corrosion resistance property and contains carbon vacancies.

It reacts with water as well as acids.

Application:

1.Used as an abrasive, in metal cladding, in cermet, incandescent filaments, and cutting tools.

2. The mixture of zirconium carbide and tantalum carbide is an important cermet material.

3. Hafnium-free zirconium carbide and niobium carbide can be used as refractory coatings in nuclear reactors.

4. Zirconium carbide is used extensively as a coating of uranium dioxide and thorium dioxide particles of nuclear fuel.

5. The coating is usually deposited by thermal chemical vapor deposition in a fluidized bed reactor.

6.  High-temperature wear-resistant surface materials

Please email us for the customization.

Email: contact@nanochemazone.com

Please contact us for customization and price inquiry

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.