Tungsten Powder
$0.00
Tungsten Powder
| Product | Tungsten Powder |
| CAS No. | 7440-33-7 |
| Appearance | Matellic Gray to Dark Gray Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | W |
| Density | 19.3g/cm3 |
| Molecular Weight | 183.84g/mol |
| Product Codes | NCZ-DCY-275/25 |
Tungsten Description:
Tungsten Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Tungsten Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Tungsten Powder
Tungsten powders are used as consumables in industries such as 3D printing of tungsten and tungsten alloys, porous materials, and highly dense powder coating. With the rapid development of 3D printing technology, porous materials, highly dense powder coating, and injection molding, the demand for high-quality spherical tungsten powders is increasing.
Tungsten powders are used as consumables in industries such as 3D printing of tungsten and tungsten alloys, porous materials, and highly dense powder coating. With the rapid development of 3D printing technology, porous materials, highly dense powder coating, and injection molding, the demand for high-quality spherical tungsten powders is increasing. High-quality spherical tungsten powder is not only good flowability, good sphericity, high apparent density and vibrational density, and low oxygen content.
Appearance: Grey powder
Size: 15-40um
Note: Other 3D printing powders are available upon any custom requirements
| No | Name | Chemical Composition(wt%) |
| 1 | 18Ni300 | Ni17-19, Mo4.5-5.2, Co8.5-9.5, Ti0.6-0.8, Al0.05-0.15，Fe(Bal.) |
| 2 | Hastelloy Alloy | Fe17-20, Cr20.5-23, Mo8-10, W0.2-1, Co0.5-2.5, C0.05-0.15, Ni (Bal.) |
| 3 | AlSi10Mg | Si9-11，Mg0.2-0.45，Al(Bal.) |
| 4 | CoCrW | Cr26.5-29, W7-9, Si1.2-1.9, Co (Bal.) |
| 5 | Co28Cr6Mo | Cr27-29, Mo5-7, Co (Bal.) |
| 6 | Spherical Ti Powder | Ti≥99.9 |
| 7 | TC4 | Al5.5-6.8, V3.5-4.5, Ti (Bal.) |
| 8 | TA15 | Al5.5-7.1, V0.8-2.5, Mo0.8-2，Zr1.5-2.5, Al (Bal.) |
| 9 | 316L | Cr16.00-18.00, Ni10.00-14.00, Mo2.00-3.00, Fe (Bal.) |
| 10 | S136 | Cr12.0-14.0, Si0.8-1.0, V0.15-0.4, C0.2-0.45, Fe (Bal.) |
| 11 | In625 | Cr20-23Mo8-10, Nb 3.15-4.15, Co≤1, Fe≤1, Ni (bal.) |
| 12 | In718 | Cr17-21, Mo2.8-3.3, Nb 4.75-5.5, Co≤1, Ni50-51, Fe (Bal.) |
| 13 | Spherica WC | C3.7-4.2, W (Bal.) |
| 14 | Spherical Cr Powder | Cr≥99.9 |
| 15 | Spherica Mo Powder | Mo≥99.9 |
| 16 | Spherica Ta Powder | Ta≥99.9 |
| 17 | Spherica W Powder | W≥99.9 |
3D Printing;
Injection molding(MIM);
Powder metallurgy(PM);
Spraying coating(SP) etc..
Description
Note: For pricing & ordering information, please get in touch with us at sales@nanochemazone.com
Please contact us for quotes on Larger Quantities and customization. E-mail: contact@nanochemazone.com
Customization:
If you are planning to order large quantities for your industrial and academic needs, please note that customization of parameters (such as size, length, purity, functionalities, etc.) is available upon request.
NOTE:
Images, pictures, colors, particle sizes, purity, packing, descriptions, and specifications for the real and actual goods may differ. These are only used on the website for the purposes of reference, advertising, and portrayal. Please contact us via email at sales@nanochemazone.com or by phone at (+1 780 612 4177) if you have any questions.
Only logged in customers who have purchased this product may leave a review.
Related products
304l Stainless Steel Powder
304l Stainless Steel Powder
| Product | 304l Stainless Steel Powder |
| CAS No. | 11143-21-4 |
| Appearance | Metallic Gray or Silver Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Fe-18Cr-8Ni |
| Density | 7.9g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-338/25 |
304l Stainless Steel Description:
304l Stainless Steel Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing.
304l Stainless Steel Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
304l Stainless Steel Powder
304L stainless steel powder is an austenitic chromium-nickel stainless steel powder with low carbon content. It offers excellent corrosion resistance, good formability and weldability, and widely used for powder metallurgy applications. The ‘L’ denotes lower carbon compared to 304 standard grade. The low carbon minimizes carbide precipitation and maximizes corrosion resistance. Powder metallurgy 304L provides a cost-effective alternative to 316L for non-critical applications not needing molybdenum alloying.
Overview
304L stainless steel powder is an austenitic chromium-nickel stainless steel powder with low carbon content. It offers excellent corrosion resistance, good formability and weldability, and widely used for powder metallurgy applications.
The ‘L’ denotes lower carbon compared to 304 standard grade. The low carbon minimizes carbide precipitation and maximizes corrosion resistance. Powder metallurgy 304L provides a cost-effective alternative to 316L for non-critical applications not needing molybdenum alloying.
This article provides an in-depth look at 304L stainless steel powder covering composition, properties, processing, applications, specifications, suppliers, costs, and other technical details.
Composition
The nominal composition of 304L stainless steel powder is listed below:
Table: Typical composition of 304L stainless steel powder
| Element | Weight % |
| Chromium (Cr) | 18-20 |
| Nickel (Ni) | 8-10.5 |
| Manganese (Mn) | <2 |
| Silicon (Si) | <1 |
| Carbon (C) | <0.03 |
| Sulfur (S) | <0.03 |
| Phosphorus (P) | <0.045 |
| Nitrogen (N) | <0.1 |
| Iron (Fe) | Balance |
Chromium and nickel are the main alloying elements. Chromium provides corrosion and oxidation resistance. Nickel enhances ductility, toughness, and weldability.
Manganese and silicon increase strength. Carbon is kept very low for optimum corrosion resistance. Sulfur, phosphorus, and nitrogen are impurities that are minimized.
Properties
Key properties of 304L stainless steel powder in the annealed condition are provided below:
Table: Properties of 304L stainless steel powder
| Property | Value |
| Density | 7.9-8.1 g/cm3 |
| Ultimate Tensile Strength | 505-620 MPa |
| Yield Strength | 205-275 MPa |
| Elongation | ≥40% |
| Hardness | ≤92 HRB |
| Modulus of Elasticity | 190-210 GPa |
| Melting Point | 1400-1450°C |
| Thermal Conductivity | 16 W/m-K |
| Electrical Resistivity | 0.072 μΩ-cm |
The combination of properties make 304L highly useful for a wide range of applications. The austenitic microstructure provides ductility, toughness, and non-magnetic behavior. 304L has excellent corrosion resistance comparable to 316L stainless steel.
By selecting ultra-low carbon powder, carbide precipitation can be avoided to maximize corrosion resistance in critical applications. Strength and hardness can be increased through cold working.
Typical applications for 304L stainless steel powder include:
Food processing equipment
Pharmaceutical tooling
Chemical plant components
Architectural panels, railings
Medical instruments and implants
Marine hardware, fittings, fasteners
Consumer products, appliances
Powder metallurgy mechanical parts
3D printing powders
304L provides cost-effective corrosion resistance versus 316L when molybdenum alloying is not needed for highly corrosive environments. The excellent polishability and non-magnetic properties also suits 304L for architectural cladding and hardware components.
Powder metallurgy is commonly used to produce small precision parts from 304L at high volumes versus machining. Additive manufacturing utilizes 304L powder for prototypes, tooling, and end-use components across industries.
Powder Manufacturing
304L stainless steel powder is commercially manufactured via gas atomization or water atomization processes.
In gas atomization, a high pressure inert gas stream disintegrates the molten metal into fine droplets, producing spherical powders ideal for additive manufacturing and MIM. Particle size distribution is controlled through process parameters.
Water atomization uses high pressure water jets to break up the metal stream into fine particles. This generates irregular, satellite particle shapes. The powder requires post-treatment for additive manufacturing.
Plasma atomization is sometimes used to produce very spherical, clean powders from a metal plasma stream in a controlled inert atmosphere. This ensures high purity and flowability.
Powder Specifications
304L stainless steel powder is commercially available in various size ranges, morphologies, and quality levels. Some typical powder specifications are below:
Table: 304L stainless steel powder specifications
| Attribute | Details |
| Particles sizes | 15-45 μm, 10-100 μm |
| Morphology | Spherical, irregular |
| Apparent density | 2.5-4.5 g/cm3 |
| Tap density | 4-5 g/cm3 |
| Hall flow rate | <30 s/50g |
| Purity | >99.5% |
| Oxygen content | <2000 ppm |
| Moisture content | <0.2% |
Smaller particle sizes below 45 μm are preferred for capturing fine features in additive manufacturing. Spherical particles provide good flowability. Apparent density correlates with powder packing efficiency.
High purity, low oxygen, and controlled moisture levels ensure quality sintered properties. Gas atomized powder offers the best specifications for critical applications.
Standards and Grades
304L stainless steel powder complies with the following standards:
ASTM A240 – Standard for chromium and chromium-nickel stainless steel plate, sheet, and strip
ASTM A313 – Standard for stainless steel spring wire
ASTM A314 – Standard for stainless steel bent wire
AMS 5501 – Stainless steel bars, wire, forgings, tubing with low carbon
AMS 5647 – Stainless steel powder, atomized, 304L
Equivalent grades include:
UNS S30403
Werkstoff No. 1.4306
SUS 304L
SS2348
Powder Storage and Handling
To prevent contamination and maintain powder properties, 304L stainless steel powder should be stored and handled as follows:
Store in sealed containers in a cool, dry environment
Use inert gas purging or vacuum to prevent moisture pickup
Keep away from sparks, flames, and ignition sources
Ground all powder handling and transfer equipment
Avoid contact with contaminants like oil, grease, paints, etc.
Use PPE – mask, gloves, eye protection when handling powder
Powder spills should be promptly cleaned using non-sparking tools and HEPA vacuuming. Powders are moderately sensitive to moisture and air exposure. Proper storage is key.
Metal Injection Molding
304L is widely used for metal injection molding of small, complex parts leveraging powder metallurgy. Key considerations include:
Feedstock: 60-68% powder loading with multi-component binder system
Molding: High shot size, fast injection speed, high holding pressure
Debinding: Solvent debinding followed by thermal debinding
Sintering: 1350-1400°C in hydrogen or vacuum atmosphere
Secondary Operations: Machining, laser marking, passivation, electropolishing
MIM service bureaus have established best practices for high-performance 304L parts with as-sintered properties approaching wrought material.
Design for AM
For additive manufacturing using 304L stainless steel powder, key design guidelines include:
Maintain wall thicknesses above 1 mm
Use self-supporting geometries with angles above 45°
Include drain holes to remove unfused powder
Observe build orientation effects on properties
Account for 20-25% shrinkage when designing mating parts
Include machining allowances of 0.5-1 mm for critical fits
Reduce overhangs, bridges, fine details that require supports
Quality control testing performed on 304L stainless steel powder includes:
Chemical analysis – ICP and OES to verify composition
Particle size analysis – Laser diffraction particle size analyzer
Powder morphology – SEM imaging at high magnifications
Apparent density and tap density – Hall flowmeter method
Powder flow rate – Hall flowmeter funnel method
Loss on ignition – ASTM E sin gravity furnace
Moisture analysis – Karl Fischer titration, LECO analysis
For sintered MIM parts, testing includes:
Dimensional tolerances – CMM inspection
Density – Archimedes method
Microstructure – Optical microscopy, image analysis
Mechanical testing – Hardness, tensile, fatigue, Charpy impact
Like most stainless steel powders and parts, 304L poses little health risk with proper handling:
Wear PPE when handling powder – mask, gloves, goggles
Avoid skin contact to prevent sensitization
Use HEPA-filtered vacuum for clean-up of dust and powder
Avoid breathing any welding or melting fumes
Dispose according to local environmental regulations
Ensure adequate ventilation and respiratory protection if grinding or machining sintered parts
No special disposal precautions are needed for 304L. With sound procedures, it poses minimal hazard for workers and the environment.
FAQ
1.What is the difference between 304 and 304L stainless steel powder?
304L has lower carbon content (<0.03%) than 304 (<0.08%) for better corrosion resistance,especially for welding. 304 is more common.
2.Does 304L powder require a controlled atmosphere?
Not necessarily, but storage in sealed containers with inert gas prevents oxidation and contamination.
3.What particle size is best for AM?
15-45 microns is typical for powder bed fusion AM to provide good flow and high resolution. Larger sizes from 45-100 microns are also used.
4.Is 304L used for metal 3D printing?
Yes, 304L is widely used for powder bed and directed energy deposition 3D printing to make prototypes, tooling, and end-use parts.
5.What causes powder to oxidize and lose reusability?
Exposure to air/moisture causes surface oxidation. Proper sealed storage with desiccant and oxygen absorbers prevents this.
6.Does 304L require solution annealing after laser sintering?
Yes, stress relieving at 1050-1150°C and rapid cooling helps restore ductility and toughness after the rapid solidification.
7.What finish can be expected on as-sintered MIM 304L parts?
Around Ra 3-6 microns initially. Polishing and etching can achieve under 0.5 micron. Plating also gives a smooth finish.
8.What tolerance can be achieved with 304L MIM parts?±0.1-0.3% is typical but tolerances under ±0.1% are possible for high precision components.
9.Why is 304L preferred over 304 stainless steel?
The lower carbon gives 304L better corrosion resistance, especially for weldments, reducing sensitization. It has become the dominant grade.
10.What is the cost premium for 304L vs. 304 powder?
Typically 10-30% higher cost for 304L due to the lower carbon composition. Price also depends on quantities ordered.
317L Powder
317L Powder
| Product | 317L Powder |
| CAS No. | 12597-67-6 |
| Appearance | Silvery Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Fe-18Cr-12Ni-3Mo |
| Density | 7.9g/cm3 |
| Molecular Weight | 150-160 g/mol |
| Product Codes | NCZ-DCY-172/25 |
317L Description:
317L Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
317L Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
317L Powder
317L powder is an austenitic stainless steel powder containing 18% chromium, 3% molybdenum, and 0.08% carbon. It offers an excellent combination of corrosion resistance, strength, weldability and cost.
Overview of 317L Powder
317L powder is an austenitic stainless steel powder containing 18% chromium, 3% molybdenum, and 0.08% carbon. It offers an excellent combination of corrosion resistance, strength, weldability and cost.
Key properties and advantages of 317L powder include:
317L Powder Properties and Characteristics
| Properties | Details |
| Composition | Fe-18Cr-3Mo-0.08C alloy |
| Density | 8.0 g/cc |
| Particle shape | Irregular, angular |
| Size range | 10-150 microns |
| Apparent density | Up to 50% of true density |
| Flowability | Moderate |
| Corrosion resistance | Excellent in many environments |
| Strengthening | Cold working and solid solution strengthening |
317L powder is widely used in chemical processing, marine applications, pulp and paper industry, nuclear power generation, and architectural features needing weathering resistance.
317L Powder Composition
| Element | Weight % |
| Iron (Fe) | Balance |
| Chromium (Cr) | 17-19% |
| Nickel (Ni) | 11-15% |
| Molybdenum (Mo) | 2.5-3.5% |
| Manganese (Mn) | <2% |
| Carbon (C) | 0.08% max |
| Silicon (Si) | 1% max |
| Nitrogen (N) | 0.10% max |
| Sulfur (S) | 0.03% max |
Iron provides the ferritic matrix and ductility
Chromium enhances corrosion and oxidation resistance
Nickel stabilizes the austenitic structure
Molybdenum further improves pitting resistance
Carbon, nitrogen and sulfur controlled as tramp elements
317L Powder Physical Properties
| Property | Values |
| Density | 8.0 g/cc |
| Melting point | 1370-1400°C |
| Electrical resistivity | 0.8 μΩ-m |
| Thermal conductivity | 16 W/mK |
| Thermal expansion | 16 x 10^-6 /K |
| Maximum service temperature | 900°C |
High density compared to ferritic stainless steels
Maintains strength and corrosion resistance at elevated temperatures
Resistivity higher than pure iron or carbon steels
Lower thermal conductivity than carbon steel
Can withstand continuous service up to 900°C
The physical properties make 317L suitable for high temperature applications requiring corrosion resistance.
317L Powder Mechanical Properties
| Property | Values |
| Tensile strength | 515-620 MPa |
| Yield strength | 205-275 MPa |
| Elongation | 40-50% |
| Hardness | 88-95 HRB |
| Impact strength | 100-150 J |
| Modulus of elasticity | 190-210 GPa |
Excellent combination of strength and ductility
Can be work hardened significantly to increase strength
Very high toughness and impact strength
Strength can be further improved through cold working
Hardness is relatively low in annealed condition
The properties provide an excellent balance of strength, ductility and toughness required for many corrosive environments.
317L Powder Applications
| Industry | Example Uses |
| Chemical | Tanks, valves, pipes, pumps |
| Petrochemical | Process equipment, tubing, valves |
| Marine | Propeller shafts, fasteners, deck hardware |
| Nuclear | Reactor vessels, fuel element cladding |
| Architectural | Railings, wall panels, roofing |
Some specific product uses:
Pollution control equipment handling hot acids
Nuclear reactor internal structures
Marine propeller shafts, deck fittings
Pulp and paper industry piping, valves
Architectural paneling, roofing, cladding
Its excellent corrosion resistance combined with good manufacturability make 317L widely used across demanding industries.
317L Powder Standards
| Standard | Description |
| ASTM A276 | Standard for stainless steel bars and shapes |
| ASTM A479 | Standard for stainless steel tubing |
| AMS 5524 | Annealed stainless steel bar, wire, forgings |
| ASME SA-276 | Specification for stainless steel bars and shapes |
| AISI 630 | Standard for 17Cr-4Ni precipitation hardening stainless steel |
These standards define:
Chemical composition limits of 317L alloy
Permissible impurity levels like S, P
Required mechanical properties
Approved production methods
Compliance testing protocols
Proper packaging, labeling and documentation
Meeting certification requirements ensures suitability of the powder for the intended applications.
317L Powder Particle Size Distribution
| Particle Size | Characteristics |
| 10-45 microns | Ultrafine grade for high density and surface finish |
| 45-150 microns | Coarse grade provides good flowability |
| 15-150 microns | Standard grade for pressing and sintering |
Finer particles allow greater densification during sintering
Coarser powder flows better and fills die cavities uniformly
Size range is tailored based on final part properties needed
Both gas and water atomized powders are available
Controlling particle size distribution allows optimizing processing behavior and final part performance.
317L Powder Apparent Density
| Apparent Density | Details |
| Up to 50% of true density | For irregular powder morphology |
| 4.5-5.5 g/cc typical | Improves with greater packing density |
Higher apparent density improves powder flow and compressibility
Irregular morphology limits maximum packing density
Values up to 60% are possible with spherical powder
High apparent density improves press filling efficiency
Higher apparent density leads to better manufacturing productivity and part quality.
317L Powder Production Method
| Method | Details |
| Gas atomization | High pressure inert gas breaks molten metal stream into fine droplets |
| Water atomization | High pressure water jet breaks metal into fine particles |
| Vacuum induction melting | High purity input materials melted under vacuum |
| Multiple remelting | Improves chemical homogenization |
| Sieving | Classifies powder into different particle size ranges |
Gas atomization provides clean, spherical powder morphology
Water atomization is a lower cost process with irregular particles
Vacuum melting and remelting minimizes gaseous impurities
Post-processing allows customization of particle sizes
Automated production and stringent quality control result in consistent powder suitable for critical applications.
317L Powder Handling and Storage
| Recommendation | Reason |
| Use PPE and ventilation | Avoid exposure to fine metallic particles |
| Ensure proper grounding | Prevent static discharge while handling |
| Avoid ignition sources | Powder can combust in oxygen atmosphere |
| Use non-sparking tools | Prevent possibility of ignition |
| Follow safety protocols | Reduce risk of burns, inhalation, ingestion |
| Store in stable containers | Prevent contamination or oxidation |
As 317L powder is flammable, ignition and explosion risks should be controlled during handling and storage. Otherwise it is relatively safe with proper precautions.
317L Powder Testing
| Test | Details |
| Chemical analysis | ICP and XRF verify composition |
| Particle size distribution | Laser diffraction determines size distribution |
| Apparent density | Hall flowmeter test per ASTM B212 standard |
| Powder morphology | SEM imaging shows particle shape |
| Flow rate analysis | Gravity flow rate through specified nozzle |
| Loss on ignition | Determines residual moisture content |
Stringent testing ensures the powder meets the required chemical purity, particle characteristics, density, morphology, and flowability per applicable specifications.
317L Powder Pros and Cons
Advantages of 317L Powder
Excellent corrosion resistance in many environments
High temperature strength and oxidation resistance
Good ductility, toughness and weldability
More cost-effective than high nickel austenitic grades
Readily formable using conventional techniques
Can be work hardened through cold/warm working
Disadvantages of 317L Powder
Lower high temperature creep strength than some ferritic grades
Lower hardness and wear resistance than martensitic grades
Susceptible to chloride stress corrosion cracking
Requires post weld annealing to prevent sensitization
Limited cold heading and forming capability
Surface discoloration over time in outdoor exposure
Comparison With 316L Powder
317L vs 316L Stainless Steel Powder
| Parameter | 317L | 316L |
| Density | 8.0 g/cc | 8.0 g/cc |
| Strength | 515-620 MPa | 485-550 MPa |
| Corrosion resistance | Excellent | Outstanding |
| Pitting resistance | Very good | Excellent |
| Cost | Low | High |
| Uses | Process industry, marine | Chemical, pharmaceutical |
317L provides higher strength at lower cost
316L offers better pitting corrosion resistance
317L has good chloride stress corrosion resistance
316L preferred for ultra-corrosive environments
317L suited for marine applications and nuclear industry
317L Powder FAQs
Q: What are the main applications of 317L stainless steel powder?
A: Main applications include chemical processing, petrochemical, marine, nuclear, pulp & paper, and architectural. It is used for equipment like tanks, valves, pipes, pumps, shafts, and cladding.
Q: What precautions should be taken when handling 317L powder?
A: Recommended precautions include ventilation, grounding, avoiding ignition sources, using non-sparking tools, protective gear, safe storage, and controlling dust exposure.
Q: How does molybdenum improve the corrosion resistance of 317L?
A: Molybdenum enhances pitting and crevice corrosion resistance in chloride environments. It stabilizes the passive film protecting the surface.
Q: What is the main difference between 304L and 317L stainless steel powder?
A: 317L contains 3% molybdenum giving it significantly better corrosion resistance compared to 304L, especially in marine and other chloride environments.
Al 3004 Powder
Al 3004 Powder
| Product | Al 3004 Powder |
| CAS No. | 7429-90-5 |
| Appearance | Silvery-Gray Metallic Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al-1.2Mn-1.0Mg |
| Density | 2.73g/cm3 |
| Molecular Weight | 27g/mol |
| Product Codes | NCZ-DCY-180/25 |
Al 3004 Description:
Al 3004 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Al 3004 Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Al 3004 powder
Al 3004 powder is a specially formulated coating material composed of aluminum alloy. It is created by combining aluminum with a precise blend of alloying elements to ensure optimal performance. The powder form allows for easy application and provides a uniform coating when properly cured.
Overview of Al 3004 Powder
Al 3004 is a wrought aluminum alloy known for its moderate strength, excellent corrosion resistance, good formability and weldability. Manganese enhances strength through solid solution strengthening while magnesium improves strength through precipitation hardening.
Key characteristics of Al 3004 powder include:
Moderate tensile strength with excellent ductility
Very good formability and weldability
Excellent corrosion resistance
High thermal and electrical conductivity
Low density
Available in various particle size distributions
Al 3004 powder is suitable for applications requiring moderate strength combined with good weldability, machinability and corrosion resistance.
Chemical Composition of Al 3004 Powder
| Element | Weight % |
| Aluminum (Al) | Balance |
| Manganese (Mn) | 1.0-1.5% |
| Magnesium (Mg) | 0.2-0.8% |
| Silicon (Si) | 0-0.6% |
| Iron (Fe) | 0-0.7% |
| Copper (Cu) | 0-0.25% |
| Chromium (Cr) | 0-0.10% |
| Zinc (Zn) | 0-0.10% |
Properties of Al 3004 Powder
| Property | Value |
| Density | 2.73 g/cm3 |
| Melting Point | 630-655°C |
| Thermal Conductivity | 180 W/mK |
| Electrical Conductivity | 41-43 %IACS |
| Young’s Modulus | 68-72 GPa |
| Poisson’s Ratio | 0.33 |
| Tensile Strength | 190-240 MPa |
| Yield Strength | 110-170 MPa |
| Elongation | 10-20% |
| Hardness | 50-65 Brinell |
The alloy offers moderate strength with excellent ductility and formability. It has good resistance to atmospheric corrosion. Thermal and electrical conductivity is high.
Production Method for Al 3004 Powder
Common production methods for Al 3004 powder include:
Gas Atomization – Molten alloy stream disintegrated by inert gas jets into fine spherical powder with controlled particle distribution.
Water Atomization – High velocity water jet used to produce fine irregular Al 3004 particles. Lower cost but higher oxygen content.
Mechanical Alloying – Ball milling a blend of aluminum and alloying powders followed by cold compaction and sintering.
Gas atomization provides superior control over powder characteristics critical for advanced applications.
Applications of Al 3004 Powder
Additive Manufacturing – Used in binder jetting, laser melting, electron beam melting processes to produce complex aluminum parts.
Metal Injection Molding – To manufacture small intricate components that need good strength and corrosion resistance.
Powder Metallurgy – Press and sinter process to produce moderately high-performance automotive and machinery parts.
Thermal Spraying – Wire arc spray deposition to produce protective coatings offering moderate wear and corrosion resistance.
Welding Filler – Used as filler wire to provide weld strength similar to base metal.
Pigments – Added to paints and coatings to provide shine and corrosion protection.
Specifications of Al 3004 Powder
Al 3004 powder is available under different size ranges, shapes, purity levels, and grades:
Particle Size: From 10-150 microns for AM methods, up to 300 microns for thermal spray processes.
Morphology: Spherical, granular, irregular and flake powder shapes are available.
Purity: From commercial grades up to high purity levels based on impurity limits.
Grades: Conforming to ASTM B209, EN 573, and ISO 209 specifications. Custom grades offered.
Flowability: Powder can be customized for specific flow rates as per application requirements.
Storage and Handling of Al 3004 Powder
Al 3004 powder should be properly handled and stored to prevent:
Oxidation and reaction with moisture
Dust explosion hazards from fine powder
Inhalation related health problems
Safety practices from supplier SDS should be followed
Inert gas blanketing, proper grounding, ventilation, and PPE is recommended when handling the powder.
Testing and Characterization Methods
Key test methods used for Al 3004 powder include:
Chemical composition analysis using OES or XRF
Particle size distribution as per ASTM B822 standard
Morphology analysis through SEM
Powder flow rate measured by Hall flowmeter
Density determined by helium pycnometry
Impurity level testing by ICP-MS
Microstructure examination by X-ray diffraction
These tests ensure batch-to-batch consistency and that the powder meets application requirements.
Comparison Between Al 3004 and Al 6061 Powders
Al 3004 and Al 6061 are two aluminum alloy powders compared:
| Parameter | Al 3004 | Al 6061 |
| Alloy type | Non-heat treatable | Heat treatable |
| Mg content | 0.2-0.8% | 0.8-1.2% |
| Strength | Moderate | Higher |
| Corrosion resistance | Excellent | Excellent |
| Weldability | Excellent | Good |
| Machinability | Good | Excellent |
| Cost | Lower | Higher |
Al 3004 offers better weldability while Al 6061 has higher strength. Both offer excellent corrosion resistance.
Al 3004 Powder FAQs
Q: How is Al 3004 powder produced?
A: Al 3004 powder is commercially produced using gas atomization, water atomization, and mechanical alloying followed by sintering. Gas atomization provides the best control of particle characteristics.
Q: What are the main applications of Al 3004 powder?
A: The major applications of Al 3004 powder include additive manufacturing, thermal spray coatings, powder metallurgy parts manufacturing, metal injection molding, pigments, and welding filler wire.
Q: What is the recommended particle size for Al 3004 powder for binder jet 3D printing?
A: For binder jetting process, the typical Al 3004 powder size range is 20-45 microns with near-spherical morphology to provide good powder bed density and binder infiltration.
Q: Does Al 3004 powder require any special handling precautions?
A: Yes, it is recommended to handle aluminum powders carefully under inert atmosphere using proper grounding, ventilation and PPE to prevent fire or explosion hazards.
Q: Where can I buy Al 3004 powder suitable for aerospace welding wire?
A: High purity gas atomized Al 3004 powder meeting aerospace standards can be purchased from leading manufacturer.
Al 6061 Powder
Al 6061 Powder
| Product | Al 6061 Powder |
| CAS No. | 12604-68-1 |
| Appearance | Gray Metallic Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al-Mg1SiCu |
| Density | 2.7g/cm3 |
| Molecular Weight | 26.98g/mol |
| Product Codes | NCZ-DCY-187/25 |
Al 6061 Description:
Al 6061 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Al 6061 Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Al 6061 powder
Al 6061 powder is a versatile aluminum material composed of various elements to enhance its properties, such as strength, corrosion resistance, and machinability. It is widely used in different industries for its excellent characteristics.
Overview of Al 6061 Powder
Al 6061 is one of the most versatile heat treatable aluminum alloys. Magnesium and silicon additions allow it to be strengthened through precipitation hardening. The alloy has become immensely popular due to its excellent corrosion resistance, machinability, weldability and medium to high strength.
Key characteristics of Al 6061 powder include:
Medium to high strength with excellent ductility and toughness
Excellent corrosion resistance and finishability
Very good weldability and machinability
High thermal and electrical conductivity
Low density
Available in a wide range of powder sizes and shapes
Al 6061 powder is used widely for aerospace, marine, automotive, construction and general engineering applications needing lightweight and good mechanical properties.
Chemical Composition of Al 6061 Powder
| Element | Weight % |
| Aluminum (Al) | Balance |
| Silicon (Si) | 0.4-0.8% |
| Iron (Fe) | 0-0.7% |
| Copper (Cu) | 0.15-0.4% |
| Manganese (Mn) | 0-0.15% |
| Magnesium (Mg) | 0.8-1.2% |
| Chromium (Cr) | 0.04-0.35% |
| Zinc (Zn) | 0-0.25% |
| Titanium (Ti) | 0-0.15% |
Production Method for Al 6061 Powder
Commercial production methods for Al 6061 powder include:
Gas Atomization – High pressure inert gas disintegrates molten alloy stream into fine spherical powder with controlled size distribution.
Water Atomization – High velocity water jet impacts and disintegrates molten metal to produce fine irregular powder particles.
Mechanical Alloying – Ball milling a blend of aluminum and alloying element powders followed by compaction and sintering.
Gas atomization provides superior control over the powder characteristics.
Applications of Al 6061 Powder
Additive Manufacturing – Used in selective laser melting, electron beam melting and binder jetting to produce complex components.
Metal Injection Molding – To manufacture small intricate parts with tight tolerances and excellent properties.
Powder Metallurgy – Press and sinter process to create high performance automotive and mechanical parts.
Thermal Spraying – Wire arc spraying to deposit protective Al 6061 coatings offering wear and corrosion resistance.
Welding Filler – Used as filler wire to provide weld strength similar to base metal.
Pigments – Added to paints and polymers to provide luster and corrosion protection.
Specifications of Al 6061 Powder
Al 6061 powder is available under different size ranges, shapes, grades and purity levels:
Particle Size: From 10-150 microns for AM methods, up to 300 microns for thermal spray processes.
Morphology: Spherical, granular, dendritic and irregular shaped particles. Smooth powder flows better.
Purity: From commercial to high purity (99.9%) tailored to meet requirements.
Grades: Conforming to ASTM B221, EN 573, and ISO 209 specifications. Custom grades offered.
Flowability: Powder can be customized for specific flow rates based on application.
Storage and Handling of Al 6061 Powder
Al 6061 powder should be properly handled and stored to prevent:
Oxidation and reaction with moisture
Dust explosion hazards from fine powder
Inhalation related health problems
Safety practices from supplier SDS should be followed
Inert gas storage, adequate ventilation, grounding, and PPE is recommended when handling the powder.
Testing and Characterization Methods
Key test methods used for Al 6061 powder include:
Chemical analysis using OES or XRF for composition
Particle size distribution as per ASTM B822 standard
Morphology analysis through SEM
Powder flow rate measured by Hall flow funnel
Density determination by helium pycnometry
Impurity testing by ICP-MS
Microstructure examination by X-ray diffraction
These tests ensure batch consistency and compliance with application requirements.
Comparison Between Al 6061 and Al 7075 Powders
Al 6061 and Al 7075 are two aluminum alloy powders compared:
| Parameter | Al 6061 | Al 7075 |
| Alloy type | Heat treatable | Heat treatable |
| Mg content | 0.8-1.2% | 2.1-2.9% |
| Strength | Medium | Very high |
| Machinability | Excellent | Poor |
| Weldability | Excellent | Poor |
| Corrosion resistance | Excellent | Good |
| Cost | Lower | Higher |
Al 6061 offers better corrosion resistance and machinability while Al 7075 provides much greater strength after heat treatment.
Al 6061 Powder FAQs
Q: How is Al 6061 powder produced?
A: Al 6061 powder is commercially produced using gas atomization, water atomization, mechanical alloying, and electrolysis techniques. Gas atomization offers optimal control of powder characteristics.
Q: What are the main applications of Al 6061 powder?
A: Key applications for Al 6061 powder include additive manufacturing, thermal spray coatings, powder metallurgy parts, metal injection molding, pigments, and welding filler wire requiring medium strength and excellent corrosion resistance.
Q: What is the recommended Al 6061 powder size for binder jetting?
A: For binder jetting process, the typical Al 6061 powder size range is 20-45 microns with spherical morphology to enable good powder bed density and binder infiltration.
Q: Does Al 6061 powder require any special handling precautions?
A: Yes, it is recommended to handle aluminum alloy powders carefully under inert atmosphere with proper grounding, ventilation and PPE to prevent fire or explosion hazards.
Q: Where can I buy Al 6061 powder suitable for aerospace applications?
A: High purity gas atomized Al 6061 powder meeting aerospace standards can be purchased from leading manufacturer.
Alloy Series Powder
Alloy Series Powder
| Product | Alloy Series Powder |
| CAS No. | 65997-19-5 |
| Appearance | Gray Metallic Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | NiCrCoMoFeAl |
| Density | 8.2-8.5g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-240/25 |
Alloy Series Description:
Alloy Series Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Alloy Series Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
High-temperature alloy series powders are designed to handle extreme high-temperature environments, providing excellent performance and heat-resistant properties. Let’s explore this range of products and understand their potential for high temperature applications.
| Product | Specification | Apparent Density | Flow Ability | Oxygen Content | Tensile Strength | Yield Strength | Elongation |
| GH3625 | 15-53µm 45-105µm 75-150µm |
≥4.40g/cm³ | ≤20s/50g | ≤300ppm | 1000±50Mpa | 600±50Mpa | 35±5% |
| GH4169 | ≥4.20g/cm³ | ≤20s/50g | ≤300ppm | 1250±30Mpa | 1000±30Mpa | 18±3% | |
| GH3230 | ≥4.40g/cm³ | ≤20s/50g | ≤300ppm | 930±30Mpa | 930±30Mpa | 25±5% | |
| GH3536 | ≥4.40g/cm³ | ≤20s/50g | ≤300ppm | 850±30Mpa | 550±20Mpa | 42±5% |
Process: Vacuum air atomization method
Advantages: high sphericity, small satellite powder, good fluidity, and high bulk density. The printed product has good fatigue resistance, anti-oxidation performance and structural stability
Applications: aerospace and industrial turbine discs, rings, blades, machine and other structures, aerospace engine combustion chambers
Packaging: ordinary packaging such as aluminum foil bags/plastic bottles/iron drums, vacuum packaging or inert gas-filled packaging, etc.
AlSi10 Powder
AlSi10 Powder
| Product | AlSi10 Powder |
| CAS No. | N/A |
| Appearance | Gray-Silver Metallic Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al90Si10 |
| Density | 2.67g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-190/25 |
AlSi10 Description:
AlSi10 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
ALSi10 Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
AlSi10 Powder
AlSi10 is an aluminum alloy powder containing 10% silicon and remainder aluminum. It offers an excellent combination of strength, low density, thermal properties, corrosion resistance and weldability.
AlSi10 Powder Composition
| Element | Composition |
| Aluminum (Al) | Balance |
| Silicon (Si) | 9-11% |
Aluminum forms the matrix providing low density, ductility and corrosion resistance.
Silicon provides solid solution strengthening and improves castability.
Strict control of the aluminum to silicon ratio is critical to achieve optimal strength and physical properties. Other minor alloying elements like magnesium, iron, copper or zinc may also be present in certain grades.
Properties of AlSi10 Powder
AlSi10 powder possesses an excellent combination of properties making it suitable for various demanding applications:
| Property | Value |
| Density | 2.7 g/cm3 |
| Melting Point | ~600°C |
| Thermal Conductivity | 150-180 W/m-K |
| Electrical Conductivity | 35-40% IACS |
| Coefficient of Thermal Expansion | 21-23 x 10<sup>-6</sup> /°C |
| Modulus of Elasticity | 80-85 GPa |
| Tensile Strength | 240-300 MPa |
| Elongation | 1-5% |
| Hardness | 80-90 Brinell |
| Corrosion Resistance | Excellent |
Low density – Up to 65% lighter than copper alloys and steels.
High thermal conductivity – Enables rapid dissipation of heat in electronics.
High strength-to-weight ratio – Strength comparable to titanium alloys with lower density.
Excellent weldability and castability – High fluidity when molten allowing easy casting and welding.
Resistant to corrosion and oxidation – Protective oxide layer prevents corrosion in many environments.
This exceptional property profile makes AlSi10 suitable for lightweight structural applications across aviation, space, automotive and other sectors.
Applications of AlSi10 Powder
Owing to its lightweight, strength and thermal properties, AlSi10 powder is ideal for:
| Applications | Benefits |
| Aerospace components | Low density combined with high strength. |
| Automotive parts | Weight reduction without compromising mechanical performance. |
| Electronic housings | Thermal management for heat dissipation combined with low weight. |
| Medical implants | Biocompatible, non-toxic, corrosion resistant. |
| Thermal management | High thermal conductivity to dissipate heat. |
Used extensively in aircraft and rocket components like engine mounts to reduce weight.
Automotive industry uses AlSi10 for pistons, transmission casings, suspension parts to improve fuel efficiency through lightweighting.
Electronic enclosures and heat sinks leverage high thermal conductivity for efficient cooling.
Rewards excellent strength-to-weight ratio with lower density compared to titanium alloys.
Provides excellent biocompatibility, corrosion resistance for medical implants like orthopedic devices.
AlSi10 delivers maximum performance in demanding applications where low mass and high strength are critical.
AlSi10 Powder Specifications
AlSi10 powder is available in various size fractions, shapes and purity levels:
| Parameter | Options |
| Particle size | 5-150 microns |
| Particle shape | Spherical, irregular |
| Apparent density | Up to 2.7 g/cm3 |
| Flow rate | Up to 25 s/50g |
| Purity | Up to 99.7% |
| Alloy variants | AlSi12, AlSi5 |
Smaller particles promote better sintering while larger sizes provide higher flowability.
Spherical morphology improves flow and packaging density. Irregular particles offer cost benefits.
Higher apparent density increases effective loading in composites manufacturing.
Higher flow rates enhance ease of powder handling and processing.
High purity reduces contamination issues during processing and improves final properties.
Range of silicon levels between 5-12% available to balance fluidity and strength.
Powder attributes are customized based on specific application requirements and processing methods.
Consolidation Methods for AlSi10 Powder
AlSi10 powder can be transformed into full density components using techniques like:
| Method | Benefits |
| Additive manufacturing | Excellent geometric freedom for complex shapes. |
| Metal injection molding | High precision net shape capability. |
| Pressing and sintering | Economical for high volume simpler geometries. |
| Extrusion | Continuous production of rods and tubes. |
| Isostatic pressing | Achieves full density and improves properties. |
Powder bed fusion additive manufacturing methods like selective laser melting are popular for prototypes or low volume production.
Metal injection molding offers closest tolerances and excellent surface finish.
Pressing followed by liquid phase sintering is commonly used but secondary processing like extrusion is needed.
Extrusion leverages excellent castability to produce rods, tubes and profiles.
Cold and hot isostatic pressing reduce porosity and increase density.
The consolidation technique influences the microstructure, final properties, geometrical capabilities and productivity.
Heat Treatment of AlSi10 Parts
Solution heat treatment and artificial aging are used to tailor the strength of AlSi10 components:
| Heat Treatment | Details | Purpose |
| Solutionizing | 530-550°C, quench | Dissolve soluble phases |
| Artificial Aging | 150-180°C, 5-10 hrs | Precipitation hardening |
| Annealing | 350°C, slow cooling | Restores ductility |
Solution heat treatment dissolves alloying elements like silicon in the aluminum matrix followed by rapid cooling or quenching.
Subsequent aging treatment causes fine precipitation resulting in considerable hardening.
Annealing helps recover ductility after extensive prior cold working.
Careful control of time and temperature of solutionizing and aging allows customizing mechanical properties as per specific requirements.
Comparison of AlSi10 Powder with Alternatives
| Alloy | AlSi10 | AlSi12 | Al6061 | Al7075 |
| Strength | High | Highest | Medium | Very High |
| Weldability | Excellent | Poor | Good | Poor |
| Corrosion Resistance | Excellent | Excellent | Excellent | Good |
| Thermal Conductivity | High | Medium | Medium | Low |
| Density | Low | Low | Low | Low |
| Cost | Low | High | Medium | High |
AlSi12 has the highest strength but poorer weldability and thermal conductivity.
6061 is a popular general purpose alloy with medium strength and good corrosion resistance.
7075 excels in very high strength but has poor weldability and only moderate corrosion resistance.
AlSi10 provides the best all-round properties with added cost benefits.
For most applications, AlSi10 offers the optimum balance of performance, weldability and cost.
Health and Safety Considerations for AlSi10 Powder
Like any metal powder, AlSi10 powder requires safe handling:
| Hazard | Precautions | PPE |
| Skin/eye contact | Avoid direct contact. Rinse if exposed. | Gloves, goggles |
| Inhalation | Avoid breathing dust. Ensure ventilation. | Respirator |
| Ingestion | Avoid hand-mouth transfer. Wash hands. | – |
| Fire | Use sand. Do not use water. | Protective gear |
Wear gloves, goggles, mask when handling powder.
Avoid skin contact. Wash after exposure.
Store in cool, dry place away from sparks, flames.
Ensure proper ventilation and dust collection.
Refer SDS and local regulations for complete guidelines.
With proper precautions and PPE, AlSi10 powder can be safely handled during storage, processing and operation.
Inspection and Testing of AlSi10 Powder
To ensure quality requirements are met, AlSi10 powder should be tested for:
| Parameter | Method | Specification |
| Chemical composition | OES, XRF, wet chemistry | Conformance to Al, Si, Mg content |
| Particle size distribution | Laser diffraction, sieving | D10, D50, D90 within range |
| Powder morphology | SEM imaging | Spherical shape and flowability |
| Apparent density | Hall flowmeter test | Minimum specified density |
| Flow rate | Hall flow meter test | Maximum flow seconds |
| Impurity levels | ICP or LECO analysis | Low oxygen, moisture content |
Routine testing as per ASTM standards ensures consistency and high quality powder suitable for critical applications.
FAQs
- What is AlSi10 alloy used for?
- AlSi10 is widely used in aerospace, automotive, and electronics applications where low weight and high strength are critical such as engine mounts, pistons, housings, heat sinks.
- Does AlSi10 require heat treatment?
- Yes, solution heat treatment followed by aging can significantly enhance the tensile strength by precipitating alloying elements like silicon.
- What methods can consolidate AlSi10 powder?
- AlSi10 powder can be consolidated to full density using additive manufacturing, metal injection molding, extrusion, and powder compact forging.
- Is AlSi10 weldable?
- Yes, AlSi10 has excellent weldability owing to the silicon alloying addition which improves fluidity in the molten state. This allows easy fusion welding.
- Is AlSi10 powder safe to handle?
- Like any fine metal powder, standard safety precautions should be taken during storage, handling and processing of AlSi10 powder to minimize health and safety risks.
AlSi10Mg Powder
AlSi10Mg Powder
| Product | AlSi10Mg Powder |
| CAS No. | N/A |
| Appearance | Gray-Silver Metallic Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | AlSi10Mg |
| Density | 1.2-1.5g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-192/25 |
AlSi10Mg Description:
AlSi10Mg Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
ALSi10Mg Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
mize health and safety risks.
AlSi10Mg powder
AlSi10Mg powder is a composite material composed of aluminum (Al), silicon (Si), and magnesium (Mg). It is specifically designed for use in additive manufacturing processes, where it is used as a feedstock material for 3D printers.
| Metal Powder | Size | Quantity | Price/kg | Size | Quantity | Price/kg |
| AlSi10Mg | 15-45μm | 1KG | 70 | 15-53μm | 1KG | 51 |
| 10KG | 42 | 10KG | 33 | |||
| 100KG | 34.6 | 100KG | 23.5 |
Overview of AlSi10Mg Powder
AlSi10Mg is an aluminum alloy powder composed primarily of aluminum along with silicon and magnesium as the major alloying elements. It is widely used in metal additive manufacturing, also known as 3D printing, due to its excellent strength, durability, weldability, and corrosion resistance.
AlSi10Mg powder can be processed through selective laser melting (SLM), electron beam melting (EBM), and direct metal laser sintering (DMLS) to create complex metal parts with fine details and custom geometries. Its properties make it suitable for aerospace, automotive, medical, and industrial applications.
This article provides a comprehensive technical overview of AlSi10Mg powder covering its composition, properties, applications, pricing, suppliers, and other key information for materials engineers, product designers, and 3D printing professionals.
Composition: Aluminum with 9-11% silicon, 0.2-0.45% magnesium
Particle shape: Spherical, high flowability
Size range: 15-45 microns
Density: 2.67 g/cc
Melting point: ~615°C
Strength: Medium to high
Uses: Aerospace, automotive, industrial 3D printing
Composition of AlSi10Mg Powder
The composition of AlSi10Mg powder consists mainly of aluminum with additions of silicon and magnesium as alloying elements. The nominal composition range is provided below:
| Element | Weight % |
| Aluminum (Al) | Base/remainder |
| Silicon (Si) | 9-11% |
| Magnesium (Mg) | 0.2-0.45% |
| Other (Fe, Mn, etc.) | < 0.55% total |
Silicon is added to aluminum to improve castability and enhance mechanical properties like yield strength and hardness. It increases fluidity during melting and improves feeding characteristics.
The addition of magnesium results in precipitation hardening which strengthens the alloy through heat treatment. Magnesium also improves corrosion resistance.
Trace amounts of iron, manganese, and other elements may be present as impurities up to 0.55% maximum. The levels of alloying additions can be varied within range to tailor the properties as per application requirements.
Nominal composition range of AlSi10Mg alloy powder
| Element | Minimum wt% | Maximum wt% |
| Aluminum | Bal. | Bal. |
| Silicon | 9 | 11 |
| Magnesium | 0.2 | 0.45 |
| Other | – | 0.55 |
Properties of AlSi10Mg Powder
AlSi10Mg exhibits properties making it suitable for demanding applications across aerospace, automotive, and industrial sectors. The key properties are highlighted below:
Mechanical Properties
High strength and hardness
Good ductility in annealed state
Excellent weldability
High fatigue strength
Physical Properties
Density: 2.67 g/cc
Melting point: ~615°C
Thermal conductivity: 130 W/m-K
Coefficient of thermal expansion: 21-24 x 10^-6 K^-1
Other
Good corrosion resistance
Excellent printability and surface finish
Biocompatible per ISO 10993 and ASTM F67
Non-magnetic
The density is comparable to aluminum alloys like AlSi12 and AlSi7Mg. The melting point is also similar to standard Al-Si casting alloys. These properties allow processing and consolidation via sintering and melting.
Overview of key properties of AlSi10Mg powder
| Property | Typical Values |
| Density | 2.67 g/cc |
| Melting Point | ~615°C |
| Thermal Conductivity | 130 W/m-K |
| Electrical Resistivity | 4-8 x 10^-8 Ωm |
| Young’s Modulus | 70-80 GPa |
| Poisson’s Ratio | 0.33 |
| Yield Strength | 215-365 MPa |
| Tensile Strength | 330-430 MPa |
| Elongation | 8-10% |
| Hardness | 80-100 Brinell |
Note: Properties depend on precise composition, manufacturing method, build orientation, heat treatment etc. Values shown are typical or standard.
The mechanical properties like high yield and tensile strength along with good ductility make AlSi10Mg suitable for high-performance parts across industries. The alloy can be age hardened to further enhance strength. Excellent corrosion resistance is achieved by silicon additions creating a protective oxide layer. Overall, AlSi10Mg provides a versatile combination of properties for metal AM.
Applications of AlSi10Mg Powder
The lightweight, strong, and printable characteristics of AlSi10Mg powder make it one of the most widely used alloys in additive manufacturing. Some typical applications include:
Aerospace: Turbine blades, rocket nozzles, structural brackets, satellite components, UAV parts
Automotive: Powertrain parts, pistons, turbochargers, heat exchangers
Industrial: Robotics, tooling, jigs and fixtures, driveshafts
Medical: Orthopedic implants, prosthetics, surgical instruments
Other: Heat sinks, hydraulic manifolds, housings, cooling channels
AlSi10Mg enables complex, optimized geometries that improve performance and efficiency in the above applications. The fine structures possible via 3D printing enhances heat transfer, fluid flow, and other properties.
The excellent strength-to-weight ratio of AlSi10Mg reduces component weight while maintaining mechanical performance. This helps improve fuel economy in vehicles and lower launch costs in space applications.
Overview of AlSi10Mg applications across industries
| Sector | Typical Applications |
| Aerospace | Turbine blades, structural brackets, rocket nozzles, satellites |
| Automotive | Powertrain, pistons, turbochargers, heat exchangers |
| Industrial | Robotics, tooling, jigs and fixtures |
| Medical | Orthopedic implants, prosthetics |
| General | Heat sinks, hydraulic manifolds, housings |
AlSi10Mg is certified for aerospace applications meeting standards like AMS4967 and AMS4169. Extensive qualifications and testing validates its performance under extreme environments. The biocompatibility per ISO 10993 and ASTM F67 allows use in medical devices and implants. Overall, AlSi10Mg provides a versatile lightweight material solution for critical applications.
Processability of AlSi10Mg Powder
AlSi10Mg powder can be processed via major metal additive manufacturing methods like:
Selective Laser Melting (SLM)
Direct Metal Laser Sintering (DMLS)
Electron Beam Melting (EBM)
Laser-based Methods: SLM and DMLS use a high power laser to selectively fuse regions of a powder bed to build up parts layer-by-layer. The consolidated material has properties comparable to conventional aluminum alloys. SLM typically uses higher laser power for full melting. DMLS has lower power for sintering powder particles.
Electron Beam Melting: EBM uses an electron beam as heat source to melt and fuse material. It can achieve higher build rates than laser processes since it fuses each layer rapidly. Material properties are similar to SLM and DMLS.
Print Parameters: Typical SLM parameters – Laser power 175-350 W, Scan speed 700-1500 mm/s, Layer thickness 20-100 μm. For EBM – Beam power 3-7 kW, Scan speed 1000-2500 mm/s, Layer thickness 50-200 μm.
Other methods: AlSi10Mg powder can also be used in binder jetting where a liquid binder is selectively deposited to form the shape. The “green” part is then sintered. Cold spray deposition is also possible.
AM processes compatible with AlSi10Mg alloy powder
| Process | Heat Source | Description |
| SLM | Laser | Selective laser melting |
| DMLS | Laser | Direct metal laser sintering |
| EBM | Electron beam | Electron beam melting |
| Binder jetting | Liquid binder | Binder printed, then sintered |
| Cold spray | Kinetic | Powder sprayed onto substrate |
AlSi10Mg powder has high absorbance to the laser/electron beam, and excellent flow and packing density. This results in good spreadability across powder bed and efficient melting/sintering. The particle size and spherical morphology also plays a key role.
Overall, AlSi10Mg offers excellent processability across PBF and related methods to fabricate complex geometries with good surface finish and feature resolution.
Powder Characteristics and Quality
AlSi10Mg powder used in AM processes exhibits the following characteristics:
Spherical powder morphology with smooth surface
Flowability with minimal agglomeration
Apparent density ~1.2-1.6 g/cc
Tap density ~2.2-2.7 g/cc
Uniform composition distribution
High purity with low internal porosity
Controlled particle size distribution
Particle shape: Spherical powder morphology provides good flow and spreadability across the powder bed. It results in uniform melting and material properties. Gas atomization is commonly used to achieve sphericity >90%.
Flowability: Powders with high flowability spread evenly and pack densely on powder bed platforms. Flow rates of 23-27 s/50g through Hall funnel are typical.
Particle size: The particle size distribution is generally 10-45 μm or 15-45 μm. Larger particles ~35-45 μm improve flow while smaller ones ~15-25 μm enhance density and resolution.
Composition control: Tight control of composition within specification maximizes material performance. Uniform distribution of alloying elements is ensured.
Purity: High purity with low porosity and inclusions prevents process defects. Oxygen content <1000 ppm.
Typical characteristics and properties of AlSi10Mg powders
| Parameter | Typical Value | Role |
| Particle shape | Spherical >90% | Flowability, density |
| Particle size (μm) | 15-45 | Density, resolution |
| Flow rate (s/50g) | 23-27 | Powder bed packing |
| Apparent density (g/cc) | 1.2-1.6 | Recyclability |
| Tap density (g/cc) | 2.2-2.7 | Green density |
| Purity | >99.5% | Defect reduction |
| Oxygen (ppm) | <1000 | Clean melting |
Parameters like particle shape distribution (PSD) and Hausner ratio indicate powder quality. Strict control over gas atomization results in high batch-to-batch consistency. Powder is supplied with composition report and lot-specific certificates of analysis (COA).
Choosing AlSi10Mg Powder
Key considerations for choosing AlSi10Mg powder include:
Application requirements: Performance needs like strength, hardness, ductility, fatigue life, etc. Applications may demand specific material certifications also.
AM process variables: Matching particle size range, shape and distribution to the printer model, layer thickness, beam power and related parameters.
Quality and consistency: Powder batches that reliably meet composition, purity, particle characteristics etc. are critical for production use.
Availability and lead times: For prototype work availability of small quantities may be key while production needs bulk orders and stable long-term supply.
Pricing: Price per kg will depend on quantity, shipment costs, supplier margins etc. Large OEM contracts get better pricing.
Technical support: Manufacturers with strong technical expertise in metal powder production and AM can provide guidance on best powder options.
Working with established suppliers and collaborating early in the AM part design process is advised when selecting AlSi10Mg powder.
Pros and Cons of AlSi10Mg Powder
Pros
High strength with good ductility
Excellent corrosion resistance
Readily weldable and machinable
Good thermal properties
Widely qualified for aerospace use
Biocompatible for medical implants
Cons
Lower yield strength than AlSi7Mg and AlSi12 alloys
Susceptible to porosity defects during printing
High reflectivity demands higher laser power
Not optimal for high temperature applications >150°C
More expensive than unalloyed aluminum powders
FAQs
- What is the chemical composition of AlSi10Mg powder?
- The typical composition is aluminum base with 9-11% silicon and 0.2-0.45% magnesium. Remaining is other trace elements at <0.55% total.
- What is the density of AlSi10Mg and AlSi10Mg powder?
- The density is around 2.67 g/cc for both the bulk alloy and the powder form.
- What are the mechanical properties of AlSi10Mg parts made by AM?
- Printed AlSi10Mg has a tensile strength of 330-430 MPa, yield strength of 215-365 MPa, and elongation of 8-10% in the as-built condition. Heat treatment can further improve properties.
- What particle size is recommended for AlSi10Mg powder in AM?
- A particle size range of 15-45 microns is commonly used, though size distributions can be optimized for specific printers and layer thickness requirements.
- Can you machine/weld AlSi10Mg AM parts?
- Yes, AlSi10Mg parts made by 3D printing can be machined and welded via conventional methods after an appropriate stress relief heat treatment.
- Is AlSi10Mg powder reusable?
- AlSi10Mg powder can typically be recycled 5-10 times before a refresh is needed, depending on AM process and contamination levels.
AlSi12 Powder
AlSi12 Powder
| Product | AlSi12 Powder |
| CAS No. | 11145-27-0 |
| Appearance | Silvery-Gray Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al88Si12 |
| Density | 2.7g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-193/25 |
AlSi12 Description:
AlSi12 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
AlSi12 Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
AlSi12 powder is a fine-grained aluminum-silicon alloy powder commonly used in additive manufacturing processes. It is produced by atomization, which involves melting the alloy and rapidly cooling it to form small powder particles. The resulting powder exhibits excellent flowability and can be easily processed using various additive manufacturing techniques such as selective laser melting (SLM) and electron beam melting (EBM)
Overview of AlSi12 Powder
AlSi12 or A413 is an aluminum casting alloy with relatively high silicon content. The addition of 12% silicon results in good wear resistance, low coefficient of thermal expansion, and high thermal conductivity.
Key properties of AlSi12 powder include:
Good strength and hardness
Excellent wear resistance
Good dimensional stability
High thermal conductivity
Good machinability and polishability
Low specific gravity
Available in various particle size distributions
AlSi12 is used for producing cylinder liners, piston rings, rocker arms, connecting rods, parts requiring heat and wear resistance. The powder metallurgy approach enables complex geometries.
Composition of AlSi12 Powder
The typical composition of AlSi12 powder is:
| Element | Weight % |
| Aluminum (Al) | Balance |
| Silicon (Si) | 11-13% |
| Copper (Cu) | <1% |
| Magnesium (Mg) | <1% |
| Iron (Fe) | <1% |
| Manganese (Mn) | <1% |
| Zinc (Zn) | <1% |
| Nickel (Ni) | <0.5% |
Properties of AlSi12 Powder
AlSi12 powder possesses the following properties:
| Property | Value |
| Density | 2.7 g/cc |
| Melting Point | 560°C |
| Thermal Conductivity | 150-180 W/mK |
| Electrical Resistivity | 4-6 μΩ.cm |
| Young’s Modulus | 80-90 GPa |
| Poisson’s Ratio | 0.33 |
| Tensile Strength | 240-300 MPa |
| Compressive Strength | 600-650 MPa |
| Elongation | 3-5% |
| Hardness | 80-90 Brinell |
The silicon additions result in higher strength, hardness, wear resistance, and thermal conductivity compared to unalloyed aluminum. The material retains good ductility and machinability.
Production Method for AlSi12 Powder
AlSi12 powder is manufactured by:
Gas Atomization – High pressure inert gas jets atomize molten AlSi12 alloy to form spherical powders. This produces powder with smooth morphology and narrow size distribution suitable for AM.
Water Atomization – High velocity water jets hit the molten metal stream to produce fine irregular AlSi12 particles. Lower cost but higher oxygen pickup.
Mechanical Milling – Ball milling of aluminum and silicon powders followed by blending, compacting and sintering. Leads to wide size distribution.
Gas atomization is preferred when spherical powder with controlled characteristics is required such as for additive manufacturing or MIM. Mechanical milling route is lower cost.
Applications of AlSi12 Powder
Key applications of AlSi12 alloy powder include:
Additive Manufacturing – Used to fabricate complex metal parts by selective laser melting, direct metal laser sintering, binder jetting etc.
Powder Metallurgy – Compacting and sintering to create high performance parts like piston rings, pump components, rocker arms.
Metal Injection Molding – Produces intricate components with excellent properties and surface finish.
Wear Resistant Coatings – Applied via thermal spray methods on cylinder bores, piston skirts, engine blocks.
Brazing Filler – For joining aluminum and steel components in automotive, aerospace applications.
Friction Materials – High silicon content improves friction performance. Used in brake pads, clutch discs.
Casting – Added to aluminum melts to improve castability and wear resistance.
Specifications of AlSi12 Powder
AlSi12 powder is available in different size ranges, grades and purity levels:
Particle Size: From 10 – 150 microns for AM, under 45 microns for MIM feedstock.
Morphology: Spherical, irregular and mixed shapes. Spherical improves flow and packing.
Purity: From commercial to high purity grades based on elemental analysis.
Oxygen Content: Levels range from 300 – 1000 ppm for gas atomized, higher for water atomized.
Grades: Customized composition and powder characteristics based on application.
Surface Area: For nanoscale powder surface area reaches up to 10 m2/g.
Handling and Storage of AlSi12 Powder
AlSi12 powder should be stored and handled carefully to avoid:
Contact with moisture – leads to oxidation. Store in sealed containers with desiccant bags.
Agglomeration – prevents flow. Store cool, dry powder and consider addition of flow agents.
Fire hazards – do not store near ignition sources due to flammability of finely divided metals.
Inhalation – use masks to prevent inhaling fine powders during handling.
Safety data sheet precautions from supplier should be followed.
Proper inert gas glove box techniques recommended when handling reactive aluminum powders.
Testing and Characterization Methods
Key test methods for AlSi12 powder include:
Chemical analysis – ICP and XRF techniques determine composition, purity levels.
Particle size analysis – Carried out as per ASTM B822 using laser diffraction.
Morphology – Scanning electron microscopy reveals shape, surface structure.
Powder flow – Measured by Hall flowmeter as per ASTM B213 standard.
Density – Measured by gas pycnometry or apparent density method.
Microstructure – X-ray diffraction analysis for phases present.
Thorough testing and inspection ensures AlSi12 powder meets application requirements.
Comparison of AlSi12 and AlSi10Mg Powders
AlSi12 and AlSi10Mg are two aluminum alloy powders compared:
| Parameter | AlSi12 Powder | AlSi10Mg Powder |
| Alloy type | Cast alloy | Wrought alloy |
| Si content | 11-13% | 9-11% |
| Mg content | <1% | 0.2-0.5% |
| Strength | Higher | Lower |
| Wear resistance | Excellent | Good |
| Corrosion resistance | Moderate | Excellent |
| Machineability | Very good | Moderate |
| Applications | Wear parts, thermal management | Aerospace, marine parts |
| Cost | Lower | Higher |
AlSi12 provides the best combination of wear properties, machinability and low cost whereas AlSi10Mg offers higher strength and corrosion resistance required for critical structural parts.
AlSi12 Powder FAQs
Q: How is AlSi12 powder produced?
A: AlSi12 powder is commercially produced by gas atomization and water atomization of the molten alloy. Mechanical milling is also used to make this powder.
Q: What is AlSi12 powder used for?
A: AlSi12 finds use in additive manufacturing, powder metallurgy parts production, thermal spray coatings, metal injection molding, and other applications needing a lightweight alloy with good wear properties and machinability.
Q: What is the typical particle size for AlSi12 powder in AM?
A: For most binder jet and powder bed fusion AM processes, the ideal particle size range for AlSi12 powder is 20-65 microns with good powder flow characteristics.
Q: Does AlSi12 powder require special handling precautions?
A: Yes, it is recommended to handle aluminum powders under inert conditions and avoid accumulation of fine powder to minimize fire and explosion hazards. Proper ventilation and PPE should be used.
Q: Where can I purchase AlSi12 powder for making wear-resistant coatings?
A: Specialty AlSi12 grades suitable for thermal spray coatings can be purchased from leading supplier
Reviews
There are no reviews yet.