Titanium Alloy Powder
$0.00
 Titanium Alloy Powder
| Product | Titanium Alloy Powder |
| CAS No. | 12743-70-3 |
| Appearance | Metallic Gray Powder |
| Purity | ≥99%,  ≥99.9%,  ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM  (Can be customized),  Ask for other available size range. |
| Ingredient | Ti-6Al-4V |
| Density | 4.43g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-260/25 |
Titanium Alloy Description:
Titanium Alloy Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Titanium Alloy Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Low oxygen pure titanium powder is the basis of powder metallurgy titanium production, is also one of the company’s leading products. At present, the company through HDH process, and oxygen control technology, the production of high-end ultra-fine low-oxygen pure titanium powder in the international leading position in the indicators, with the characteristics of ultrafine powder size, ultra-low oxygen content, low impurities, to achieve the large-scale production of high-end low-oxygen pure titanium powder.
Low oxygen pure titanium powder is the basis of powder metallurgy titanium production, is also one of the company’s leading products. At present, the company through HDH process, and oxygen control technology, the production of high-end ultra-fine low-oxygen pure Titanium Alloy Powder in the international leading position in the indicators, with the characteristics of ultrafine powder size, ultra-low oxygen content, low impurities, to achieve the large-scale production of high-end low-oxygen pure titanium powder. It can produce a variety of titanium powder products, such as 150μm, 75μm, 45μm, 10μm, 3μm and so on, with oxygen content reduced by 50% compared with conventional commercial products. The high-end ultra-fine low-oxygen pure titanium powder produced by the company has been listed as a qualified supplier of titanium powder in China’s first nuclear chemical project. At present, the domestic market share of our high-end low-oxygen pure titanium powder is more than 70%.
Product Specification
| Pure titanium powder | Mesh | Particle size≤ | PSD | Element（%）＜ | |||||||||
| D10 | D50 | D90 | Fe | Cl | Mg | Mn | Si | C | N | H | O | ||
| -100mesh | 150μm | 45-50 | 90-95 | 135-140 | 0.03 | 0.02 | 0.01 | 0.01 | 0.01 | 0.03 | 0.03 | 0.03 | 0.13 |
| -200mesh | 75μm | 18-23 | 38-45 | 65-70 | 0.03 | 0.02 | 0.01 | 0.01 | 0.01 | 0.03 | 0.03 | 0.03 | 0.16 |
| -325mesh | 45μm | 10-15 | 26-31 | 46-51 | 0.03 | 0.02 | 0.01 | 0.01 | 0.01 | 0.03 | 0.03 | 0.03 | 0.2 |
Remark: Supporting customized according to customer requirements
The powder has high purity, low oxygen.
Ultrafine powder particle size.
Mass production of 150μm, 75μm, 45μm, 10μm, 3μm and other particle size products
Hydride- dehydrogenation (HDH process)
Monthly output of 35 tons, 420 tons of annual output.
Application
Mainly used in hydrogen battery, powder metallurgy raw materials, surface coating agent, aluminum alloy additives, electric vacuum getter, spray, plating, MIM and other fields.
Pulverizing Process:
Titanium Sponge
Vacuum High
Temperature Hydrogenation
Titanium Hydride Hydrogenation Granulation
Titanium Hydride Powder
Vacuum High Temperature Dehydrogenation
Dehydrogenation Titanium
Dehydrogenation Granulation
Screening
Inspection
Finished Products
Packaging
FAQ
How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
What can you buy from us?
3D metal powder, MIM powder, Electronic paste, the products included are 316L, 17-4ph, H13, sendust,Inconel718,Inconel625m, Silver powder, silver paste, Rare earth products.
Description
Note: For pricing & ordering information, please get in touch with us at sales@nanochemazone.com
Please contact us for quotes on Larger Quantities and customization. E-mail: contact@nanochemazone.com
Customization:
If you are planning to order large quantities for your industrial and academic needs, please note that customization of parameters (such as size, length, purity, functionalities, etc.) is available upon request.
NOTE:
Images, pictures, colors, particle sizes, purity, packing, descriptions, and specifications for the real and actual goods may differ. These are only used on the website for the purposes of reference, advertising, and portrayal. Please contact us via email at sales@nanochemazone.com or by phone at (+1 780 612 4177) if you have any questions.
Only logged in customers who have purchased this product may leave a review.
Related products
18Ni300 Powder
18Ni300 Powder
| Product | 18Ni300 Powder |
| CAS No. | 7440-02-0 |
| Appearance | Gray Powder |
| Purity | ≥99%,  ≥99.9%,  ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM  (Can be customized),  Ask for other available size range. |
| Ingredient | 18Ni |
| Density | 8.2g/cm3 |
| Molecular Weight | 58.69g/mol |
| Product Codes | NCZ-DCY-191/25 |
18Ni300 Description:
18Ni300 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
18Ni300 Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Best 18Ni300 Powder for 3D printing
18Ni300 powder is a high-performance alloy composed primarily of nickel (Ni) and a balanced blend of other elements such as chromium (Cr), molybdenum (Mo), and manganese (Mn).
| Metal Powder | Size | Quantity | Price/kg |
| 18Ni300 | 15-53μm | 1KG | 72 |
| 10KG | 43 | ||
| 100KG | 35.8 |
Properties and Characteristics of 18Ni300 Powder
18Ni300 powder boasts a unique combination of properties that make it a highly sought-after material for 3D printing applications. Here are some of its key characteristics:
| Property | Description |
| High Strength and Toughness | Even after 3D printing, 18Ni300 parts exhibit exceptional strength and toughness, making them ideal for demanding applications. Imagine a 3D-printed gear that can withstand incredible pressure without breaking – that’s the power of 18Ni300. |
| Excellent Wear Resistance | This material stands up to wear and tear remarkably well. Think of a 3D-printed mold that retains its shape and function even after countless uses. |
| Low-Carbon Content | The low carbon content minimizes the risk of cracking during the 3D printing process, ensuring smooth and reliable production. |
| Good Weldability | 18Ni300 parts can be readily welded, allowing for the creation of complex structures or the joining of 3D-printed components with traditional manufacturing techniques. |
| High Dimensional Accuracy | The spherical shape and consistent particle size of 18Ni300 powder contribute to excellent dimensional accuracy in the final 3D-printed parts. |
Specifying Your Needs: Specifications, Sizes, and Grades
When selecting 18Ni300 powder for your 3D printing project, it’s crucial to consider the specific requirements of your application. Here’s a breakdown of some key specifications to keep in mind:
| Specification | Description |
| Particle Size | The size of the powder particles significantly impacts the final properties and printability of the 3D-printed part. Finer powders generally offer better surface finish and detail but may require specialized printing equipment. |
| Flowability | The powder’s ability to flow freely is essential for even distribution during the 3D printing process. Good flowability ensures consistent material deposition and minimizes printing defects. |
| Apparent Density | This refers to the weight of powder per unit volume. It’s a crucial factor for determining the amount of material needed for your print and optimizing printing parameters. |
| Grade | Different grades of 18Ni300 powder may offer variations in composition or properties to cater to specific application needs. For instance, some grades might prioritize higher strength, while others focus on improved machinability. |
Understanding the Options: Available Sizes and Standards
18Ni300 powder is typically available in a range of particle sizes to suit various 3D printing technologies. Some common size ranges include:
15-45 micrometers (µm)
45-75 µm
75-100 µm
The choice of particle size depends on the specific 3D printing process and the desired part properties. For example, laser beam melting (LBM) often utilizes finer powders (15-45 µm) for high-resolution printing, while electron beam melting (EBM) can handle slightly larger particles (45-75 µm).
Several industry standards govern the quality and specifications of metal powders for additive manufacturing, including 18Ni300 powder. Here are some relevant standards to be aware of:
ASTM International (ASTM) F3049 – Standard Specification for Metal Powders Used in Additive Manufacturing Processes
Aerospace Material Specifications (AMS) 5649 – Additive Manufacturing Powder, Maraging Steel, 18Ni-3Co-3Mo-0.5Ti
Frequently Asked Questions (FAQ) About 18Ni300 Powder
Q: What are the advantages of using 18Ni300 powder for 3D printing?
A: 18Ni300 powder offers a compelling combination of high strength, toughness, excellent wear resistance, and good weldability. It also boasts low-carbon content for minimized cracking risk and good dimensional accuracy in printed parts.
Q: What are some limitations of 18Ni300 powder?
A: Compared to some other metal powders, 18Ni300 may require a post-printing heat treatment process to achieve its full strength and toughness potential. Additionally, the material can be more expensive than some commonly used 3D printing materials.
Q: Is 18Ni300 powder safe to handle?
A: Metal powders, including 18Ni300, can pose health risks if inhaled. It’s crucial to follow proper safety protocols when handling these materials, including using appropriate personal protective equipment (PPE) and working in a well-ventilated environment.
Q: What are the future prospects for 18Ni300 powder in 3D printing?
A: With ongoing research and development, 18Ni300 powder is expected to play an increasingly significant role in 3D printing. Advancements in powder production technologies and 3D printing processes could further enhance the printability and properties of this versatile material, unlocking new possibilities for high-performance metal additive manufacturing.
By understanding the composition, properties, applications, and supplier landscape of 18Ni300 powder, you’re well-equipped to leverage this powerful material for your 3D printing projects. Remember to carefully consider your specific needs and consult with reputable suppliers to ensure you select the optimal 18Ni300 powder for your application.
304l Stainless Steel Powder
304l Stainless Steel Powder
| Product | 304l Stainless Steel Powder |
| CAS No. | 11143-21-4 |
| Appearance | Metallic Gray or Silver Powder |
| Purity | ≥99%,  ≥99.9%,  ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM  (Can be customized),  Ask for other available size range. |
| Ingredient | Fe-18Cr-8Ni |
| Density | 7.9g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-338/25 |
304l Stainless Steel Description:
304l Stainless Steel Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing.
304l Stainless Steel Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
304l Stainless Steel Powder
304L stainless steel powder is an austenitic chromium-nickel stainless steel powder with low carbon content. It offers excellent corrosion resistance, good formability and weldability, and widely used for powder metallurgy applications. The ‘L’ denotes lower carbon compared to 304 standard grade. The low carbon minimizes carbide precipitation and maximizes corrosion resistance. Powder metallurgy 304L provides a cost-effective alternative to 316L for non-critical applications not needing molybdenum alloying.
Overview
304L stainless steel powder is an austenitic chromium-nickel stainless steel powder with low carbon content. It offers excellent corrosion resistance, good formability and weldability, and widely used for powder metallurgy applications.
The ‘L’ denotes lower carbon compared to 304 standard grade. The low carbon minimizes carbide precipitation and maximizes corrosion resistance. Powder metallurgy 304L provides a cost-effective alternative to 316L for non-critical applications not needing molybdenum alloying.
This article provides an in-depth look at 304L stainless steel powder covering composition, properties, processing, applications, specifications, suppliers, costs, and other technical details.
Composition
The nominal composition of 304L stainless steel powder is listed below:
Table: Typical composition of 304L stainless steel powder
| Element | Weight % |
| Chromium (Cr) | 18-20 |
| Nickel (Ni) | 8-10.5 |
| Manganese (Mn) | <2 |
| Silicon (Si) | <1 |
| Carbon (C) | <0.03 |
| Sulfur (S) | <0.03 |
| Phosphorus (P) | <0.045 |
| Nitrogen (N) | <0.1 |
| Iron (Fe) | Balance |
Chromium and nickel are the main alloying elements. Chromium provides corrosion and oxidation resistance. Nickel enhances ductility, toughness, and weldability.
Manganese and silicon increase strength. Carbon is kept very low for optimum corrosion resistance. Sulfur, phosphorus, and nitrogen are impurities that are minimized.
Properties
Key properties of 304L stainless steel powder in the annealed condition are provided below:
Table: Properties of 304L stainless steel powder
| Property | Value |
| Density | 7.9-8.1 g/cm3 |
| Ultimate Tensile Strength | 505-620 MPa |
| Yield Strength | 205-275 MPa |
| Elongation | ≥40% |
| Hardness | ≤92 HRB |
| Modulus of Elasticity | 190-210 GPa |
| Melting Point | 1400-1450°C |
| Thermal Conductivity | 16 W/m-K |
| Electrical Resistivity | 0.072 μΩ-cm |
The combination of properties make 304L highly useful for a wide range of applications. The austenitic microstructure provides ductility, toughness, and non-magnetic behavior. 304L has excellent corrosion resistance comparable to 316L stainless steel.
By selecting ultra-low carbon powder, carbide precipitation can be avoided to maximize corrosion resistance in critical applications. Strength and hardness can be increased through cold working.
Typical applications for 304L stainless steel powder include:
Food processing equipment
Pharmaceutical tooling
Chemical plant components
Architectural panels, railings
Medical instruments and implants
Marine hardware, fittings, fasteners
Consumer products, appliances
Powder metallurgy mechanical parts
3D printing powders
304L provides cost-effective corrosion resistance versus 316L when molybdenum alloying is not needed for highly corrosive environments. The excellent polishability and non-magnetic properties also suits 304L for architectural cladding and hardware components.
Powder metallurgy is commonly used to produce small precision parts from 304L at high volumes versus machining. Additive manufacturing utilizes 304L powder for prototypes, tooling, and end-use components across industries.
Powder Manufacturing
304L stainless steel powder is commercially manufactured via gas atomization or water atomization processes.
In gas atomization, a high pressure inert gas stream disintegrates the molten metal into fine droplets, producing spherical powders ideal for additive manufacturing and MIM. Particle size distribution is controlled through process parameters.
Water atomization uses high pressure water jets to break up the metal stream into fine particles. This generates irregular, satellite particle shapes. The powder requires post-treatment for additive manufacturing.
Plasma atomization is sometimes used to produce very spherical, clean powders from a metal plasma stream in a controlled inert atmosphere. This ensures high purity and flowability.
Powder Specifications
304L stainless steel powder is commercially available in various size ranges, morphologies, and quality levels. Some typical powder specifications are below:
Table: 304L stainless steel powder specifications
| Attribute | Details |
| Particles sizes | 15-45 μm, 10-100 μm |
| Morphology | Spherical, irregular |
| Apparent density | 2.5-4.5 g/cm3 |
| Tap density | 4-5 g/cm3 |
| Hall flow rate | <30 s/50g |
| Purity | >99.5% |
| Oxygen content | <2000 ppm |
| Moisture content | <0.2% |
Smaller particle sizes below 45 μm are preferred for capturing fine features in additive manufacturing. Spherical particles provide good flowability. Apparent density correlates with powder packing efficiency.
High purity, low oxygen, and controlled moisture levels ensure quality sintered properties. Gas atomized powder offers the best specifications for critical applications.
Standards and Grades
304L stainless steel powder complies with the following standards:
ASTM A240 – Standard for chromium and chromium-nickel stainless steel plate, sheet, and strip
ASTM A313 – Standard for stainless steel spring wire
ASTM A314 – Standard for stainless steel bent wire
AMS 5501 – Stainless steel bars, wire, forgings, tubing with low carbon
AMS 5647 – Stainless steel powder, atomized, 304L
Equivalent grades include:
UNS S30403
Werkstoff No. 1.4306
SUS 304L
SS2348
Powder Storage and Handling
To prevent contamination and maintain powder properties, 304L stainless steel powder should be stored and handled as follows:
Store in sealed containers in a cool, dry environment
Use inert gas purging or vacuum to prevent moisture pickup
Keep away from sparks, flames, and ignition sources
Ground all powder handling and transfer equipment
Avoid contact with contaminants like oil, grease, paints, etc.
Use PPE – mask, gloves, eye protection when handling powder
Powder spills should be promptly cleaned using non-sparking tools and HEPA vacuuming. Powders are moderately sensitive to moisture and air exposure. Proper storage is key.
Metal Injection Molding
304L is widely used for metal injection molding of small, complex parts leveraging powder metallurgy. Key considerations include:
Feedstock:Â 60-68% powder loading with multi-component binder system
Molding:Â High shot size, fast injection speed, high holding pressure
Debinding:Â Solvent debinding followed by thermal debinding
Sintering: 1350-1400°C in hydrogen or vacuum atmosphere
Secondary Operations:Â Machining, laser marking, passivation, electropolishing
MIM service bureaus have established best practices for high-performance 304L parts with as-sintered properties approaching wrought material.
Design for AM
For additive manufacturing using 304L stainless steel powder, key design guidelines include:
Maintain wall thicknesses above 1 mm
Use self-supporting geometries with angles above 45°
Include drain holes to remove unfused powder
Observe build orientation effects on properties
Account for 20-25% shrinkage when designing mating parts
Include machining allowances of 0.5-1 mm for critical fits
Reduce overhangs, bridges, fine details that require supports
Quality control testing performed on 304L stainless steel powder includes:
Chemical analysis – ICP and OES to verify composition
Particle size analysis – Laser diffraction particle size analyzer
Powder morphology – SEM imaging at high magnifications
Apparent density and tap density – Hall flowmeter method
Powder flow rate – Hall flowmeter funnel method
Loss on ignition – ASTM E sin gravity furnace
Moisture analysis – Karl Fischer titration, LECO analysis
For sintered MIM parts, testing includes:
Dimensional tolerances – CMM inspection
Density – Archimedes method
Microstructure – Optical microscopy, image analysis
Mechanical testing – Hardness, tensile, fatigue, Charpy impact
Like most stainless steel powders and parts, 304L poses little health risk with proper handling:
Wear PPE when handling powder – mask, gloves, goggles
Avoid skin contact to prevent sensitization
Use HEPA-filtered vacuum for clean-up of dust and powder
Avoid breathing any welding or melting fumes
Dispose according to local environmental regulations
Ensure adequate ventilation and respiratory protection if grinding or machining sintered parts
No special disposal precautions are needed for 304L. With sound procedures, it poses minimal hazard for workers and the environment.
FAQ
1.What is the difference between 304 and 304L stainless steel powder?
304L has lower carbon content (<0.03%) than 304 (<0.08%) for better corrosion resistance,especially for welding. 304 is more common.
2.Does 304L powder require a controlled atmosphere?
Not necessarily, but storage in sealed containers with inert gas prevents oxidation and contamination.
3.What particle size is best for AM?
15-45 microns is typical for powder bed fusion AM to provide good flow and high resolution. Larger sizes from 45-100 microns are also used.
4.Is 304L used for metal 3D printing?
Yes, 304L is widely used for powder bed and directed energy deposition 3D printing to make prototypes, tooling, and end-use parts.
5.What causes powder to oxidize and lose reusability?
Exposure to air/moisture causes surface oxidation. Proper sealed storage with desiccant and oxygen absorbers prevents this.
6.Does 304L require solution annealing after laser sintering?
Yes, stress relieving at 1050-1150°C and rapid cooling helps restore ductility and toughness after the rapid solidification.
7.What finish can be expected on as-sintered MIM 304L parts?
Around Ra 3-6 microns initially. Polishing and etching can achieve under 0.5 micron. Plating also gives a smooth finish.
8.What tolerance can be achieved with 304L MIM parts?±0.1-0.3% is typical but tolerances under ±0.1% are possible for high precision components.
9.Why is 304L preferred over 304 stainless steel?
The lower carbon gives 304L better corrosion resistance, especially for weldments, reducing sensitization. It has become the dominant grade.
10.What is the cost premium for 304L vs. 304 powder?
Typically 10-30% higher cost for 304L due to the lower carbon composition. Price also depends on quantities ordered.
420 Powder
420 Powder
| Product | 420 Powder |
| CAS No. | 73665-45-9 |
| Appearance | Silvery Powder |
| Purity | ≥99%,  ≥99.9%,  ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM  (Can be customized),  Ask for other available size range. |
| Ingredient | Fe-12Cr-0.3C |
| Density | 7.7g/cm3 |
| Molecular Weight | 15-66g/mol |
| Product Codes | NCZ-DCY-173/25 |
420 Description:
420 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
420 Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
316L is an austenitic stainless steel. The Mo content of 316L gives it excellent corrosion resistance
17-4PH is a martensitic precipitation hardening stainless steel with high strength, hardness and corrosion resistance.
420 is a martensitic stainless steel with good mechanical properties, thermal conductivity and polishing properties similar to mold steel, while maintaining good corrosion resistance.
316L is an austenitic stainless steel. The Mo content of 316L gives it excellent corrosion resistance
17-4PH is a martensitic precipitation hardening stainless steel with high strength, hardness and corrosion resistance.
420 is a martensitic stainless steel with good mechanical properties, thermal conductivity and polishing properties similar to mold steel, while maintaining good corrosion resistance.
Physical properties
| Trademark | Size range | Size distribution | Hall flow rate | Bulk density | Tap density | ||
| D10(μm) | D50(μm) | D90(μm) | |||||
| 316L | 15-53μm | 17-23 | 30-38 | 50-58 | 25s/50g | 4.0g/cm³ | 4.5g/cm³ |
| 17-4PH | 15-53μm | 4.0g/cm³ | 4.5g/cm³ | ||||
| 420 | 15-53μm | 4.0g/cm³ | 4.5g/cm³ | ||||
Heat treatment recommendations
| Trademark | Heat treatment recommendations |
| 316L | 1050℃/2h/WQ |
| 17-4PH | 1040°C/2h +480°C/4h |
| 420 | 1050°C/0.5h/WQ |
| Trademark | Hardness(HRC) | Tensile strength (σb/Mpa) | Yield strength (σp0.2/Mpa) | Elongation (δ5/%) |
| 316L | 13-15 | 650 | 550 | 45 |
| 17-4PH | 32-42 | 1310 | 1175 | 13 |
| 420 | 48-52 | 1950 | 1530 | 7 |
Chemical composition range (wt,-%)
| Trademark | C | Cr | Ni | Cu | Nb | Mo |
| 316L | ≤0.03 | 16.00-18.00 | 10.00-14.00 | – | – | 2.00-3.00 |
| 17-4PH | ≤0.03 | 15.5-17.5 | 3.00-5.00 | 3.00-5.00 | 0.15-0.45 | – |
| 420 | 0.35-0.45 | 12.00-14.00 | ≤0.6 | – | ≤0.20 | ≤0.20 |
| Trademark | Si | Mn | S | P | O | Fe |
| 316L | ≤1.00 | ≤2.00 | ≤0.03 | ≤0.045 | ≤0.08 | Bal |
| 17-4PH | ≤1.00 | ≤1.00 | ≤0.03 | ≤0.03 | ≤0.03 | Bal |
| 420 | ≤1.00 | ≤1.00 | ≤0.03 | ≤0.045 | ≤0.03 | Bal |
430L Powder
430L Powder
| Product | 430L Â Powder |
| CAS No. | 12597-68-1 |
| Appearance | Silvery or Gray Powder |
| Purity | ≥99%,  ≥99.9%,  ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM  (Can be customized),  Ask for other available size range. |
| Ingredient | Fe-16Cr |
| Density | 7.7g/cm3 |
| Molecular Weight | 150-160 g/mol |
| Product Codes | NCZ-DCY-174/25 |
430L Description:
430L Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
430L Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
430L Powder
430L powder is a ferritic stainless steel powder containing 17% chromium with additions of molybdenum and niobium for enhanced corrosion resistance. It provides an optimal balance of corrosion resistance, strength, weldability and cost.
Overview of 430L Powder
430L powder is a ferritic stainless steel powder containing 17% chromium with additions of molybdenum and niobium for enhanced corrosion resistance. It provides an optimal balance of corrosion resistance, strength, weldability and cost.
Key properties and advantages of 430L powder:
430L Powder Properties and Characteristics
| Properties | Details |
| Composition | Fe-17Cr-Nb-Mo alloy |
| Density | 7.7 g/cc |
| Particle shape | Irregular, angular |
| Size range | 10-150 microns |
| Apparent density | Up to 50% of true density |
| Flowability | Moderate |
| Corrosion resistance | Excellent in many environments |
| Strengthening | Solid solution and precipitation strengthening |
430L powder is widely used in chemical processing, marine hardware, automotive exhaust components, industrial valves and flanges, and structural parts needing weathering resistance.
430L Powder Composition
| Element | Weight % |
| Iron (Fe) | Balance |
| Chromium (Cr) | 16-18% |
| Carbon (C) | 0.12% max |
| Silicon (Si) | 1% max |
| Manganese (Mn) | 1% max |
| Molybdenum (Mo) | 0.5% max |
| Niobium (Nb) | 0.3-0.6% |
| Nitrogen (N) | 0.03% max |
| Sulfur (S) | 0.03% max |
Iron provides the base matrix and ductility
Chromium enhances corrosion and oxidation resistance
Niobium and molybdenum provide precipitation strengthening
Carbon, nitrogen and sulfur are controlled as tramp elements
The composition is designed to provide optimum corrosion resistance while retaining suitable ductility, toughness and weldability.
430L Powder Physical Properties
| Property | Values |
| Density | 7.7 g/cc |
| Melting point | 1400-1450°C |
| Electrical resistivity | 0.6-0.7 μΩ-m |
| Thermal conductivity | 26 W/mK |
| Curie temperature | 1440°C |
| Maximum service temperature | 650-750°C |
Density is moderately high for a stainless steel
Provides high temperature strength and corrosion resistance
Resistivity higher than pure iron or low alloy steels
Becomes paramagnetic above Curie point
Can withstand moderately high operating temperatures
The physical properties make 430L suitable for corrosive environments and moderately high temperature applications requiring oxidation resistance.
430L Powder Mechanical Properties
| Property | Values |
| Tensile strength | 450-650 MPa |
| Yield strength | 250-350 MPa |
| Elongation | 35-45% |
| Modulus of elasticity | 190-210 GPa |
| Hardness | 80-90 HRB |
| Impact strength | 50-100 J |
Provides moderately high strength for a stainless steel
Excellent ductility and impact toughness
Strength can be further increased through heat treatment
Hardness is relatively low compared to martensitic grades
The properties provide a good combination of strength, ductility, and toughness required for many corrosive environments and load conditions.
430L Powder Applications
| Industry | Example Uses |
| Chemical | Tanks, valves, pipes, pumps |
| Automotive | Exhaust components, fuel injection parts |
| Construction | Cladding, architectural features |
| Oil and gas | Wellhead equipment, drilling tools |
| Manufacturing | Pressing tooling, molds, dies |
Some specific product uses:
Marine hardware like railings, hinges, fasteners
Automotive exhaust manifolds, mufflers, catalytic converters
Chemical processing equipment like valves and flanges
Oil country tubular goods for downhole environments
Architectural paneling, cladding and decorative features
Its excellent corrosion resistance combined with good manufacturability make 430L widely used across industries needing weathering and oxidation resistance.
| Standard | Description |
| ASTM A743 | Standard for corrosion resistant chromium steel castings |
| ASTM A744 | Standard for corrosion resistant chromium steel sheet and strip |
| AMS 5759 | Annealed corrosion resistant steel bar, wire, forgings |
| SAE J405 | Automotive weathering steel sheet |
| DIN 17440 | Stainless steels for corrosion resistant applications |
These standards define:
Chemical composition limits of 430L alloy
Permissible impurity levels like S, P
Required mechanical properties
Approved production methods
Compliance testing protocols
Proper packaging, labeling and documentation
Meeting certification requirements ensures suitability of the powder for the target applications and markets.
430L Powder Particle Size Distribution
| Particle Size | Characteristics |
| 10-45 microns | Ultrafine grade for high density and surface finish |
| 45-150 microns | Coarse grade provides good flowability |
| 15-150 microns | Standard grade for pressing and sintering |
Finer particles allow greater densification during sintering
Coarser powder flows better and fills die cavities uniformly
Size range is tailored based on final part properties needed
Both gas and water atomized powders are available
Controlling particle size distribution allows optimizing processing behavior and final part performance.
430L Powder Apparent Density
| Apparent Density | Details |
| Up to 50% of true density | For irregular powder morphology |
| 3.5-4.5 g/cc typical | Improves with greater packing density |
Higher apparent density improves powder flow and compressibility
Irregular morphology limits maximum packing density
Values up to 60% are possible with spherical powders
High apparent density improves press filling efficiency
Higher apparent density leads to better manufacturing productivity and part quality.
| Method | Details |
| Gas atomization | High pressure inert gas breaks molten metal stream into fine droplets |
| Water atomization | High pressure water jet breaks metal into fine particles |
| Vacuum induction melting | High purity input materials melted under vacuum |
| Multiple remelting | Improves chemical homogenization |
| Sieving | Classifies powder into different particle size ranges |
Gas atomization provides clean, spherical powder morphology
Water atomization is a lower cost process with irregular particles
Vacuum melting and remelting minimizes gaseous impurities
Post-processing allows customization of particle sizes
Automated production and stringent quality control result in consistent powder suitable for critical applications.
430L Powder Handling and Storage
| Recommendation | Reason |
| Use PPE and ventilation | Avoid exposure to fine metallic particles |
| Ensure proper grounding | Prevent static discharge while handling |
| Avoid ignition sources | Powder can combust in oxygen atmosphere |
| Use non-sparking tools | Prevent possibility of ignition during handling |
| Follow safety protocols | Reduce risk of burns, inhalation, and ingestion |
| Store in stable containers | Prevent contamination or oxidation |
As 430L powder is flammable, ignition and explosion risks should be controlled during handling and storage. Otherwise it is relatively safe with proper precautions.
430L Powder Inspection and Testing
| Test | Details |
| Chemical analysis | ICP and XRF verify composition |
| Particle size distribution | Laser diffraction determines size distribution |
| Apparent density | Hall flowmeter test per ASTM B212 standard |
| Powder morphology | SEM imaging shows particle shape |
| Flow rate analysis | Gravity flow rate through specified nozzle |
| Loss on ignition | Determines residual moisture content |
Stringent testing ensures the powder meets the required chemical purity, particle characteristics, density, morphology, and flowability per applicable specifications.
430L Powder Pros and Cons
Advantages of 430L Powder
Excellent corrosion resistance in many environments
Good ductility, toughness and weldability
Cost-effective compared to austenitic grades
Can be precipitation hardened to increase strength
Good high temperature oxidation resistance
Readily formable using conventional techniques
Disadvantages of 430L Powder
Lower strength than martensitic or ferritic grades
Requires care during welding to avoid sensitization
Susceptible to chloride stress corrosion cracking
Limited high temperature tensile strength
Lower hardness and wear resistance than austenitic grades
Surface discoloration over time in outdoor exposure
Comparison With 304L Powder
430L vs 304L Stainless Steel Powder
| Parameter | 430L | 304L |
| Density | 7.7 g/cc | 8.0 g/cc |
| Strength | 450-650 MPa | 520-620 MPa |
| Corrosion resistance | Excellent | Outstanding |
| Heat resistance | Good | Excellent |
| Weldability | Good | Excellent |
| Cost | Low | High |
| Uses | Automotive, construction | Chemical processing, marine |
430L has slightly lower strength but better cost
304L has superior corrosion and heat resistance
430L has better room temperature toughness
304L is preferred for applications above 500°C
430L suited for outdoor structures and automotive parts
430L Powder FAQs
Q: What are the main applications of 430L stainless steel powder?
A: Main applications include automotive exhaust components, chemical processing equipment, oil and gas tools, architectural paneling and cladding, marine hardware, and manufacturing tooling.
Q: What precautions should be taken when working with 430L powder?
A: Recommended precautions include ventilation, PPE, proper grounding, inert atmosphere, avoiding ignition sources, using non-sparking tools, and safe storage in stable containers.
Q: What is the effect of niobium addition in 430L stainless steel?
A: Niobium provides precipitation strengthening through formation of nitrides and carbides. This strengthens the steel while retaining good corrosion resistance and ductility.
Q: How does 430L differ from 409 and 439 stainless steel grades?
A: 430L has higher corrosion resistance than 409 and higher strength than 439. It provides an optimal combination of corrosion resistance, formability, weldability and cost.
Al 3103 Powder
Al 3103 Powder
| Product | Al 3103 Powder |
| CAS No. | 7429-90-5 |
| Appearance | Grayish Metallic Powder |
| Purity | ≥99%,  ≥99.9%,  ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM  (Can be customized),  Ask for other available size range. |
| Ingredient | Al-1.2Mn |
| Density | 2.73g/cm3 |
| Molecular Weight | 27g/mol |
| Product Codes | NCZ-DCY-181/25 |
Al 3130 Description:
Al 3130 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Al 3130 Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Al 3103 powder
Al 3103 powder is a form of aluminum alloy that exhibits excellent mechanical properties, corrosion resistance, and thermal conductivity. It belongs to the 3xxx series of aluminum alloys, which are known for their moderate strength and exceptional formability. The powder form allows for easier handling, processing, and fabrication, making it suitable for various industrial applications.
Overview of Al 3103 Powder
Al 3103 is a non-heat treatable wrought aluminum alloy known for its excellent corrosion resistance, good formability and weldability. Manganese additions improve strength through solid solution strengthening while maintaining excellent ductility.
Key characteristics of Al 3103 powder include:
Moderate strength with high ductility and toughness
Excellent weldability and formability
Very good corrosion resistance
High thermal and electrical conductivity
Low density
Available in various particle size distributions
Al 3103 powder is suitable for applications like chemical tanks, food processing equipment, heat exchangers, road tankers, utensils etc. needing moderate strength combined with excellent corrosion resistance.
Chemical Composition of Al 3103 Powder
| Element | Weight % |
| Aluminum (Al) | Balance |
| Manganese (Mn) | 1.0-1.5% |
| Silicon (Si) | 0.6% max |
| Iron (Fe) | 0.7% max |
| Copper (Cu) | 0.10% max |
| Magnesium (Mg) | 0.10% max |
| Zinc (Zn) | 0.10% max |
| Chromium (Cr) | 0.05-0.20% |
Manganese is the principal alloying element in 3103 aluminum. Iron, silicon, copper, and zinc are present as impurity elements with specific limits.
Properties of Al 3103 Powder
| Property | Value |
| Density | 2.73 g/cm3 |
| Melting Point | 630-654°C |
| Thermal Conductivity | 130 W/mK |
| Electrical Conductivity | 41-43% IACS |
| Young’s Modulus | 70 GPa |
| Poisson’s Ratio | 0.33 |
| Tensile Strength | 110-180 MPa |
| Yield Strength | 55-110 MPa |
| Elongation | 18-30% |
| Hardness | 25-55 Brinell |
The alloy offers moderate strength with excellent ductility, toughness and formability. It has very good resistance to atmospheric and marine environments.
Production Method for Al 3103 Powder
Gas Atomization – Molten alloy stream disintegrated by inert gas jets into fine spherical powder with controlled size distribution.
Water Atomization – High velocity water jet used to produce fine irregular Al 3103 particles. More economical but higher oxygen content.
Mechanical Alloying – Ball milling of aluminum and manganese powders followed by cold compaction and sintering.
Gas atomization provides the best control over powder characteristics like particle size, shape and microstructure.
Applications of Al 3103 Powder
Additive Manufacturing – Suitable for binder jetting and selective laser melting processes to produce complex aluminum parts.
Powder Metallurgy – Press and sinter process to create parts with good mechanical properties and machinability.
Metal Injection Molding – To manufacture small intricate components needing moderate strength and corrosion resistance.
Thermal Spraying – Wire arc spraying to produce protective coatings with moderate wear and corrosion resistance.
Welding Filler – Used as filler wire providing weld strength similar to base metal.
Pigments – Added to paints and coatings to provide shine and corrosion protection.
Specifications of Al 3103 Powder
Al 3103 powder is available under different size ranges, shapes, purity levels and grades:
Particle Size:Â From 10-150 microns for AM methods, up to 300 microns for thermal spray processes.
Morphology:Â Spherical, granular, dendritic and irregular shaped particles. Smooth powder flows better.
Purity:Â From commercial to high purity (99.8%) grades tailored for application.
Grades:Â Conforming to ASTM B209, EN 573, ISO specifications. Custom grades offered.
Flowability:Â Excellent powder flow rates above 25 s/50g can be customized.
Storage and Handling of Al 3103 Powder
Al 3103 powder should be properly handled and stored to prevent:
Oxidation and reaction with moisture
Dust explosion hazards from fine powder
Inhalation related health issues
Safety practices from supplier SDS should be followed
Inert gas blanketing, proper grounding, ventilation, and PPE is recommended when handling the powder.
Testing and Characterization Methods
Key test methods used for Al 3103 powder include:
Chemical analysis using OES or XRF for composition
Particle size distribution as per ASTM B822 standard
Morphology analysis through SEM
Powder flow rate measured by Hall flow funnel
Density determination by helium pycnometry
Impurity testing by ICP-MS
Microstructure examination by X-ray diffraction
These tests ensure batch consistency and compliance with specifications.
Comparison Between Al 3103 and Al 3003 Powders
Al 3103 and Al 3003 are two aluminum alloy powders compared:
| Parameter | Al 3103 | Al 3003 |
| Alloy type | Non-heat treatable | Non-heat treatable |
| Mn content | 1.0-1.5% | 1.0-1.5% |
| Strength | Slightly lower | Slightly higher |
| Corrosion resistance | Excellent | Excellent |
| Weldability | Excellent | Excellent |
| Cost | Lower | Higher |
Al 3103 offers better formability whereas Al 3003 provides marginally higher strength. Both offer excellent corrosion resistance.
Al 3103 Powder FAQs
Q: How is Al 3103 powder produced?
A: Al 3103 powder is commercially produced using gas atomization, water atomization, and mechanical alloying followed by sintering. Gas atomization provides the best control of particle characteristics.
Q: What are the main applications of Al 3103 powder?
A: The major applications of Al 3103 powder include additive manufacturing, metal injection molding, thermal spray coatings, powder metallurgy parts, pigments, and welding filler wire.
Q: What is the typical Al 3103 powder size used for selective laser melting?
A: For SLM process, the ideal Al 3103 powder size range is 20-45 microns with spherical morphology to enable good powder bed density and melt pool formation.
Q: Does Al 3103 powder require any special handling precautions?
A: Yes, it is recommended to handle aluminum powders carefully under inert atmosphere using proper grounding, ventilation and PPE to prevent fire or explosion hazards.
Q: Where can I buy Al 3103 powder suitable for marine applications?
A: Al 3103 powder with high corrosion resistance tailored for marine environments can be purchased from leading manufacturer.
Al 3104 Powder
Al 3104 Powder
| Product | Al 3104 Â Powder |
| CAS No. | 7429-90-5 |
| Appearance | Silvery-Gray Metallic Powder |
| Purity | ≥99%,  ≥99.9%,  ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM  (Can be customized),  Ask for other available size range. |
| Ingredient | Al-1Mn-1Mg |
| Density | 2.72g/cm3 |
| Molecular Weight | 27g/mol |
| Product Codes | NCZ-DCY-183/25 |
Al 3104 Description:
Al 3104 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Al 3104 Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Al 3104 powder
Al 3104 powder is an aluminum alloy composed primarily of aluminum (Al) with small additions of manganese (Mn) and magnesium (Mg). This powder form of the alloy offers distinct advantages in terms of its processability and versatility. It is commonly used in various industries due to its excellent combination of strength, corrosion resistance, and formability.
Overview of Al 3104 Powder
Al 3104 is a 3000 series wrought aluminum alloy known for its good corrosion resistance, excellent formability and weldability. Manganese additions provide strength through solid solution strengthening while maintaining ductility and toughness.
Key characteristics of Al 3104 powder include:
Moderate strength with excellent ductility
Very good weldability and formability
Excellent corrosion resistance
High thermal and electrical conductivity
Low density
Available in various particle size distributions
Al 3104 powder is suitable for chemical tanks, utensils, heat exchangers and applications needing moderate strength combined with good corrosion resistance.
Chemical Composition of Al 3104 Powder
| Element | Weight % |
| Aluminum (Al) | Balance |
| Manganese (Mn) | 1.0-1.5% |
| Silicon (Si) | 0.3% max |
| Iron (Fe) | 0.7% max |
| Copper (Cu) | 0.25% max |
| Magnesium (Mg) | 0.25% max |
| Zinc (Zn) | 0.20% max |
| Chromium (Cr) | 0.05-0.20% |
Properties of Al 3104 Powder
| Property | Value |
| Density | 2.73 g/cm3 |
| Melting Point | 634-643°C |
| Thermal Conductivity | 134 W/mK |
| Electrical Conductivity | 38-42% IACS |
| Young’s Modulus | 70 GPa |
| Poisson’s Ratio | 0.33 |
| Tensile Strength | 150-195 MPa |
| Yield Strength | 95-120 MPa |
| Elongation | 20-30% |
| Hardness | 45-65 Brinell |
The alloy offers moderate strength with high ductility and excellent formability. It has very good resistance to atmospheric corrosion and marine environments.
Production Method for Al 3104 Powder
Common production methods for Al 3104 powder include:
Gas Atomization – Molten alloy stream disintegrated with high pressure inert gas jets into fine spherical powder. Controlled particle size distribution.
Water Atomization – High velocity water jet used to produce fine irregular Al 3104 particles. More economical but higher oxygen pickup.
Mechanical Alloying – Ball milling of aluminum and manganese powder blends followed by cold compaction and sintering.
Gas atomization provides the best control over powder characteristics like particle size, shape and microstructure.
Applications of Al 3104 Powder
Typical applications of Al 3104 powder include:
Metal Injection Molding – To manufacture small intricate components needing moderate strength and good corrosion resistance.
Additive Manufacturing – Suitable for binder jetting and selective laser melting processes to produce complex aluminum parts.
Powder Metallurgy – Press and sinter process to create parts with good mechanical properties and machinability.
Thermal Spraying – Wire arc spray deposition to produce protective coatings offering moderate wear and corrosion resistance.
Welding Filler – Used as filler wire to provide weld strength similar to base metal.
Pigments – Added to paints and plastics to provide shine and corrosion protection.
Specifications of Al 3104 Powder
Al 3104 powder is available under different size ranges, shapes, purity levels and grades:
Particle Size:Â From 10-150 microns for AM methods, up to 300 microns for thermal spray processes.
Morphology:Â Spherical, granular, dendritic and irregular powder shapes. Smooth powder has better flowability.
Purity:Â From commercial to high purity (99.8%) grades tailored for application.
Grades:Â Conforming to ASTM B209, EN 573, ISO 209 specifications. Custom grades offered.
Flowability:Â Powder can be customized for excellent flow rates above 25 s/50g.
Storage and Handling of Al 3104 Powder
Al 3104 powder should be properly handled and stored to prevent:
Oxidation and reaction with moisture
Dust explosion hazards from fine powder
Inhalation related health problems
Safety practices from supplier SDS should be followed
Inert gas blanketing, proper grounding, ventilation, and PPE is recommended when handling the powder.
Testing and Characterization Methods
Key test methods used for Al 3104 powder include:
Chemical analysis using OES or XRF for composition
Particle size distribution as per ASTM B822 standard
Morphology analysis through SEM
Powder flow rate measured by Hall flow funnel
Density determination by helium pycnometry
Impurity testing by ICP-MS
Microstructure examination by X-ray diffraction
These tests ensure batch consistency and compliance with application requirements.
Comparison Between Al 3104 and Al 3003 Powders
Al 3104 and Al 3003 are two aluminum alloy powders compared:
| Parameter | Al 3104 | Al 3003 |
| Alloy type | Non-heat treatable | Non-heat treatable |
| Mn content | 1.0-1.5% | 1.0-1.5% |
| Strength | Slightly lower | Slightly higher |
| Corrosion resistance | Excellent | Excellent |
| Weldability | Excellent | Excellent |
| Cost | Lower | Higher |
Al 3104 offers slightly better formability whereas Al 3003 provides marginally higher strength. Both offer excellent corrosion resistance.
Al 3104 Powder FAQs
Q: How is Al 3104 powder produced?
A: Al 3104 powder is commercially produced using gas atomization, water atomization, and mechanical alloying followed by sintering. Gas atomization provides the best control of particle characteristics.
Q: What are the main applications of Al 3104 powder?
A: The major applications of Al 3104 powder include metal injection molding, additive manufacturing, thermal spray coatings, powder metallurgy parts, pigments, and welding filler wire.
Q: What is the recommended Al 3104 powder size for binder jet 3D printing?
A: For binder jetting process, the typical Al 3104 powder size range is 20-45 microns with near-spherical morphology to enable good powder bed density.
Q: Does Al 3104 powder require any special handling precautions?
A: Yes, it is recommended to handle aluminum powders carefully in inert atmosphere using proper grounding, ventilation and PPE to prevent fire or explosion hazards.
Q: Where can I purchase Al 3104 powder suitable for marine applications?
A: Al 3104 powder with high corrosion resistance tailored for marine environments can be purchased from leading manufacturer.
Al 3203 Powder
Al 3203 Powder
| Product | Al 3203 Powder |
| CAS No. | 7429-90-5 |
| Appearance | Silvery-Gray Metallic Powder |
| Purity | ≥99%,  ≥99.9%,  ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM  (Can be customized),  Ask for other available size range. |
| Ingredient | Al2O3 |
| Density | 2.7g/cm3 |
| Molecular Weight | 27g/mol |
| Product Codes | NCZ-DCY-186/25 |
Al 3203 Description:
Al 3203 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Al 3203 Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Al 3203 powder
Al2O3 powder is an aluminum alloy composed of aluminum, copper, and manganese. It is renowned for its excellent strength and high fatigue resistance, making it an ideal choice for demanding environments and structural components. The precise composition and manufacturing process of Al 3203 powder ensure consistent quality and performance, making it a reliable material for numerous applications.
Overview of Al2O3 Powder
Al2O3 or aluminum oxide is a ceramic material known for its high hardness, excellent dielectric properties, refractoriness, abrasion and corrosion resistance. Alumina powder is the powder form of aluminum oxide used in a variety of applications.
Key properties of Al2O3 powder include:
High hardness and wear resistance
High melting point of over 2000°C
Low electrical and thermal conductivity
Excellent thermal shock resistance
Resistant to strong acids and alkalis
Low density around 3.95 g/cm3
Chemically inert material
White color powder available in various particle sizes
Chemical Composition of Al2O3 Powder
| Compound | Formula | Weight % |
| Aluminum oxide | Al2O3 | 99.5% min |
| Silicon dioxide | SiO2 | 0.05% max |
| Iron oxide | Fe2O3 | 0.08% max |
| Titanium dioxide | TiO2 | 0.03% max |
| Sodium oxide | Na2O | 0.05% max |
| Magnesium oxide | MgO | 0.03% max |
High purity Al2O3 powder contains over 99.5% aluminum oxide as the principal component. Maximum impurity limits are specified for silica, iron oxide, titania, and other oxides.
| Property | Value |
| Melting point | 2050°C |
| Density | 3.95 g/cm3 |
| Hardness | 9 Mohs |
| Flexural strength | 330 MPa |
| Compressive strength | 2600 MPa |
| Porosity | <1% |
| Thermal conductivity | 30 W/m.K |
| Electrical resistivity | >1014 ohm.cm |
| Dielectric strength | 15-35 kV/mm |
| Water absorption | 0% |
Production Methods for Al2O3 Powder
The common production methods for Al2O3 powder include:
Bayer Process – Alumina trihydrate is extracted from bauxite ore and thermally converted to alumina powder. This process yields high purity powder.
Hall–Héroult Process – Alumina is dissolved in molten cryolite and electrolyzed to produce aluminum. Alumina powder is recovered as a by-product.
Calcination – Dehydration and calcination of various aluminum hydroxides to form alumina powder.
Sol-gel – Alumina gel is formed from aluminum alkoxides or nitrates and then dried and calcined to make nanoscale alumina powder.
Flame Pyrolysis – Vapor phase combustion of aluminum chloride produces ultrafine alumina powder.
The Bayer process is the most common industrial method while the others yield specialty grade alumina.
Applications of Al2O3 Powder
Abrasives – For grinding, sanding, polishing, blasting media due to its hardness.
Refractories – High temperature furnace linings, ceramics, firebricks for metallurgy, glass, cement industries.
Ceramics – Electrical, structural, biomedical applications using alumina ceramics.
Catalysts – Gamma alumina used as catalyst support and directly as catalyst.
Coatings – Thermal spray coatings for wear and corrosion protection.
Polishing – CMP slurries for polishing silicon wafers, optic components, metals.
Fillers – Added to plastics, rubber, paper to improve mechanical properties.
Cosmetics – For manufacturing makeup, personal care products.
Specifications of Al2O3 Powder
Al2O3 powder is available under various purity levels, particle size distribution, and grades:
Purity – From industrial (90%) to high purity (99.99%) grades based on impurity levels.
Particle Size – Ranging from nanoscale (10-50 nm) to coarse grade (over 100 microns).
Phases – Alpha, gamma, theta, delta phases have different properties.
Grades – Conforming to standards for abrasives, technical ceramics, bioceramics, etc.
Surface Area – For nanosized powder, surface area is 1-100 m2/g.
Morphology – Regular and spherical shaped particles preferred.
Applications – Powder customized for composites, 3D printing, other uses.
Health and Safety When Handling Al2O3 Powder
Al2O3 powder does not pose severe health and safety risks but standard precautions should be taken:
Use dust masks or respirators to avoid inhaling fine particles during handling.
Wear protective goggles and gloves while handling powder.
Prevent skin contact to avoid drying and irritation.
Avoid generating and breathing airborne dust. Ensure adequate ventilation.
Handle and store powder carefully avoiding dispersion in air.
Properly dispose of waste powder based on environmental regulations.
Refer to Material Safety Data Sheet (MSDS) provided by the supplier for complete health hazard data.
Inspection and Testing of Al2O3 Powder
Key tests carried out for quality control of Al2O3 powder are:
Chemical analysis using X-ray Fluorescence (XRF) or Inductively Coupled Plasma (ICP) techniques to ensure composition meets specifications.
Particle size analysis through laser diffraction or dynamic light scattering method.
Scanning Electron Microscopy (SEM) to examine particle morphology.
Specific surface area measurement using gas absorption technique.
X-ray diffraction (XRD) analysis to determine phases present.
Impurity analysis for trace metallic elements using ICP mass spectrometry.
Loss of mass on ignition when heated to 1000°C.
Density measurement through pycnometry method.
Thorough inspection and testing ensures the powder meets the quality and performance requirements of specific applications.
Comparison Between α-Al2O3 and γ-Al2O3 Powder
α-Al2O3 and γ-Al2O3 are two common phases of alumina powder compared here:
| Parameter | α-Al2O3 | γ-Al2O3 |
| Crystal structure | Hexagonal | Cubic |
| Density | 3.95 g/cm3 | 3.65 g/cm3 |
| Hardness | 9 Mohs | 8 Mohs |
| Melting point | 2050°C | ~1100°C |
| Thermal conductivity | 30 W/m.K | 5-10 W/m.K |
| Surface area | <10 m2/g | 100-300 m2/g |
| Applications | Abrasives, ceramics | Catalysts, adsorbents |
| Price | Lower | Higher |
α-Al2O3 has higher hardness, density, thermal conductivity and refractoriness whereas γ-Al2O3 has higher surface area and extensively used in catalysts. α-form has wider applications and lower price.
FAQs
Q: What is Al2O3 powder used for?
A: Al2O3 powder is used to manufacture abrasives, refractories, structural ceramics, ceramic coatings, polishing compounds, plastic & rubber fillers, and other applications due to its high hardness, strength, and corrosion resistance.
Q: What is the difference between white, pink, and brown alumina powder?
A: White alumina is high purity Al2O3. Pink and brown alumina contain small amounts of chromium and iron oxides respectively that impart color. White alumina is used when color contamination must be avoided.
Q: Is Al2O3 powder hazardous?
A: Al2O3 powder is generally not classified as a hazardous material but like all fine powders can cause irritation and breathing issues during handling. Use of proper PPE is recommended.
Q: What is the difference between fused and sintered alumina powder?
A: Fused alumina is produced by melting pure alumina whereas sintered type is made by compacting and firing alumina powder. Fused alumina has higher purity and density compared to sintered.
Q: Where can I buy Al2O3 powder for making ceramic components?
A: High purity fine alumina powder for ceramic applications can be purchased from leading suppliers . Ensure the powder meets specifications for your application.
Alloy Series Powder
Alloy Series Powder
| Product | Alloy Series Powder |
| CAS No. | 65997-19-5 |
| Appearance | Gray Metallic Powder |
| Purity | ≥99%,  ≥99.9%,  ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM  (Can be customized),  Ask for other available size range. |
| Ingredient | NiCrCoMoFeAl |
| Density | 8.2-8.5g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-240/25 |
Alloy Series Description:
Alloy Series Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Alloy Series Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
High-temperature alloy series powders are designed to handle extreme high-temperature environments, providing excellent performance and heat-resistant properties. Let’s explore this range of products and understand their potential for high temperature applications.
| Product | Specification | Apparent Density | Flow Ability | Oxygen Content | Tensile Strength | Yield Strength | Elongation |
| GH3625 | 15-53µm 45-105µm 75-150µm |
≥4.40g/cm³ | ≤20s/50g | ≤300ppm | 1000±50Mpa | 600±50Mpa | 35±5% |
| GH4169 | ≥4.20g/cm³ | ≤20s/50g | ≤300ppm | 1250±30Mpa | 1000±30Mpa | 18±3% | |
| GH3230 | ≥4.40g/cm³ | ≤20s/50g | ≤300ppm | 930±30Mpa | 930±30Mpa | 25±5% | |
| GH3536 | ≥4.40g/cm³ | ≤20s/50g | ≤300ppm | 850±30Mpa | 550±20Mpa | 42±5% |
Process: Vacuum air atomization method
Advantages: high sphericity, small satellite powder, good fluidity, and high bulk density. The printed product has good fatigue resistance, anti-oxidation performance and structural stability
Applications: aerospace and industrial turbine discs, rings, blades, machine and other structures, aerospace engine combustion chambers
Packaging: ordinary packaging such as aluminum foil bags/plastic bottles/iron drums, vacuum packaging or inert gas-filled packaging, etc.
Reviews
There are no reviews yet.